lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 05/13] dt-bindings: ddr: add LPDDR3 memories
On Mon, May 06, 2019 at 05:11:53PM +0200, Lukasz Luba wrote:
> Specifies the AC timing parameters of the LPDDR3 memory device.
>
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> .../devicetree/bindings/ddr/lpddr3-timings.txt | 58 +++++++++++++
> Documentation/devicetree/bindings/ddr/lpddr3.txt | 97 ++++++++++++++++++++++
> 2 files changed, 155 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
> create mode 100644 Documentation/devicetree/bindings/ddr/lpddr3.txt
>
> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
> new file mode 100644
> index 0000000..3a2ef3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
> @@ -0,0 +1,58 @@
> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
> +
> +The structures are based on LPDDR2 and extended where needed.
> +
> +Required properties:
> +- compatible : Should be "jedec,lpddr3-timings"
> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
> +- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
> +
> +Optional properties:
> +
> +The following properties represent AC timing parameters from the memory
> +data-sheet of the device for a given speed-bin. All these properties are
> +of type <u32> and the default unit is ps (pico seconds).
> +- tRFC
> +- tRRD
> +- tRPab
> +- tRPpb
> +- tRCD
> +- tRC
> +- tRAS
> +- tWTR
> +- tWR
> +- tRTP
> +- tW2W-C2C
> +- tR2R-C2C
> +- tFAW
> +- tXSR
> +- tXP
> +- tCKE
> +- tCKESR
> +- tMRD
> +
> +Example:
> +
> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {

Now the unit-address should be @800000000

With that and the other example fixed,

Reviewed-by: Rob Herring <robh@kernel.org>

> + compatible = "jedec,lpddr3-timings";
> + reg = <800000000>; /* workaround: it shows max-freq */
> + min-freq = <100000000>;

\
 
 \ /
  Last update: 2019-05-07 19:02    [W:0.195 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site