lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 12/16] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
From
Date
On 5/3/2019 4:56 PM, Thierry Reding wrote:
> On Wed, Apr 24, 2019 at 10:50:00AM +0530, Vidya Sagar wrote:
>> Add P2U (PIPE to UPHY) and PCIe controller nodes to device tree.
>> The Tegra194 SoC contains six PCIe controllers and twenty P2U instances
>> grouped into two different PHY bricks namely High-Speed IO (HSIO-12 P2Us)
>> and NVIDIA High Speed (NVHS-8 P2Us) respectively.
>>
>> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
>> ---
>> Changes since [v4]:
>> * None
>>
>> Changes since [v3]:
>> * None
>>
>> Changes since [v2]:
>> * Included 'hsio' or 'nvhs' in P2U node's label names to reflect which brick
>> they belong to
>> * Removed leading zeros in unit address
>>
>> Changes since [v1]:
>> * Flattened all P2U nodes by removing 'hsio-p2u' and 'nvhs-p2u' super nodes
>> * Changed P2U nodes compatible string from 'nvidia,tegra194-phy-p2u' to 'nvidia,tegra194-p2u'
>> * Changed reg-name from 'base' to 'ctl'
>> * Updated all PCIe nodes according to the changes made to DT documentation file
>>
>> arch/arm64/boot/dts/nvidia/tegra194.dtsi | 449 +++++++++++++++++++++++
>> 1 file changed, 449 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
>> index c77ca211fa8f..dc433b446ff5 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> [...]
>> + pcie@14180000 {
> [...]
>> + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */
>> + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */
>> + 0x82000000 0x0 0x40000000 0x1B 0x40000000 0x0 0xC0000000>; /* non-prefetchable memory (3GB) */
>
> Please be consistent in the capitalization of hexadecimal numbers. You
> use lowercase hexdigits in one place and upprecase in others. Just stick
> to one (preferably lowercase since that's already used elsewhere in this
> file).
Ok.

>
>> + };
>> +
>> + pcie@14100000 {
>
> Also, entries should be sorted by unit-address, so controller 0 above
> needs to go further down.
Ok.

>
> Thierry
>

\
 
 \ /
  Last update: 2019-05-07 12:11    [W:0.094 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site