lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 4/6] pinctrl: meson: Rework enable/disable bias part
Hi Guillaume,

On Tue, May 7, 2019 at 1:57 PM Guillaume La Roque <glaroque@baylibre.com> wrote:
>
> rework bias enable/disable part to prepare drive-strength integration
if it was my patch I would add "no functional changes" at the end to
make it explicit that this only changes the structure of the code.

>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
with the minor comments from below addressed:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
> drivers/pinctrl/meson/pinctrl-meson.c | 79 ++++++++++++++++-----------
> 1 file changed, 48 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
> index 96a4a72708e4..a216a7537564 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
> @@ -174,13 +174,57 @@ int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
> return 0;
> }
>
> +static int meson_pinconf_disable_bias(struct meson_pinctrl *pc,
> + unsigned int pin)
> +{
> + struct meson_bank *bank;
> + unsigned int reg, bit = 0;
> + int ret;
> +
> + ret = meson_get_bank(pc, pin, &bank);
> + if (ret)
> + return ret;
add an empty line here to keep it consistent with the rest of the code

[...]
> static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
> unsigned long *configs, unsigned num_configs)
> {
> struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
> struct meson_bank *bank;
bank is not read anymore (it's passed to meson_get_bank to set it, but
then it's not read, which is probably why my compiler doesn't
complain)

> enum pin_config_param param;
> - unsigned int reg, bit;
> int i, ret;
>
> ret = meson_get_bank(pc, pin, &bank);
> @@ -192,44 +236,17 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
>
> switch (param) {
> case PIN_CONFIG_BIAS_DISABLE:
> - dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
> -
> - meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg,
> - &bit);
> - ret = regmap_update_bits(pc->reg_pullen, reg,
> - BIT(bit), 0);
> + ret = meson_pinconf_disable_bias(pc, pin);
> if (ret)
> return ret;
> break;
> case PIN_CONFIG_BIAS_PULL_UP:
> - dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
> -
> - meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
> - &reg, &bit);
> - ret = regmap_update_bits(pc->reg_pullen, reg,
> - BIT(bit), BIT(bit));
> - if (ret)
> - return ret;
> -
> - meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
> - ret = regmap_update_bits(pc->reg_pull, reg,
> - BIT(bit), BIT(bit));
> + ret = meson_pinconf_enable_bias(pc, pin, 1);
use "true" instead of "1"?

> if (ret)
> return ret;
> break;
> case PIN_CONFIG_BIAS_PULL_DOWN:
> - dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
> -
> - meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
> - &reg, &bit);
> - ret = regmap_update_bits(pc->reg_pullen, reg,
> - BIT(bit), BIT(bit));
> - if (ret)
> - return ret;
> -
> - meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
> - ret = regmap_update_bits(pc->reg_pull, reg,
> - BIT(bit), 0);
> + ret = meson_pinconf_enable_bias(pc, pin, 0);
use "false" instead of "0"?

one overall comment: thank you for working on this!
in my opinion it's a good preparation step to ensure that
meson_pinconf_set is easy to understand even if we add more
functionality here


Regards
Martin

\
 
 \ /
  Last update: 2019-05-07 19:54    [W:0.484 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site