lkml.org 
[lkml]   [2019]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] PCI: endpoint: Add DMA to Linux PCI EP Framework
From
Date
Hi Vinod,

On 31/05/19 10:37 AM, Vinod Koul wrote:
> Hi Kishon,
>
> On 30-05-19, 11:16, Kishon Vijay Abraham I wrote:
>> +Vinod Koul
>>
>> Hi,
>>
>> On 30/05/19 4:07 AM, Alan Mikhak wrote:
>>> On Mon, May 27, 2019 at 2:09 AM Gustavo Pimentel
>>> <Gustavo.Pimentel@synopsys.com> wrote:
>>>>
>>>> On Fri, May 24, 2019 at 20:42:43, Alan Mikhak <alan.mikhak@sifive.com>
>>>> wrote:
>>>>
>>>> Hi Alan,
>>>>
>>>>> On Fri, May 24, 2019 at 1:59 AM Gustavo Pimentel
>>>>> <Gustavo.Pimentel@synopsys.com> wrote:
>>>>>>
>>>>>> Hi Alan,
>>>>>>
>>>>>> This patch implementation is very HW implementation dependent and
>>>>>> requires the DMA to exposed through PCIe BARs, which aren't always the
>>>>>> case. Besides, you are defining some control bits on
>>>>>> include/linux/pci-epc.h that may not have any meaning to other types of
>>>>>> DMA.
>>>>>>
>>>>>> I don't think this was what Kishon had in mind when he developed the
>>>>>> pcitest, but let see what Kishon was to say about it.
>>>>>>
>>>>>> I've developed a DMA driver for DWC PCI using Linux Kernel DMAengine API
>>>>>> and which I submitted some days ago.
>>>>>> By having a DMA driver which implemented using DMAengine API, means the
>>>>>> pcitest can use the DMAengine client API, which will be completely
>>>>>> generic to any other DMA implementation.
>>
>> right, my initial thought process was to use only dmaengine APIs in
>> pci-epf-test so that the system DMA or DMA within the PCIe controller can be
>> used transparently. But can we register DMA within the PCIe controller to the
>> DMA subsystem? AFAIK only system DMA should register with the DMA subsystem.
>> (ADMA in SDHCI doesn't use dmaengine). Vinod Koul can confirm.
>
> So would this DMA be dedicated for PCI and all PCI devices on the bus?

Yes, this DMA will be used only by PCI ($patch is w.r.t PCIe device mode. So
all endpoint functions both physical and virtual functions will use the DMA in
the controller).
> If so I do not see a reason why this cannot be using dmaengine. The use

Thanks for clarifying. I was under the impression any DMA within a peripheral
controller shouldn't use DMAengine.
> case would be memcpy for DMA right or mem to device (vice versa) transfers?

The device is memory mapped so it would be only memcopy.
>
> Btw many driver in sdhci do use dmaengine APIs and yes we are missing
> support in framework than individual drivers

I think dmaengine APIs is used only when the platform uses system DMA and not
ADMA within the SDHCI controller. IOW there is no dma_async_device_register()
to register ADMA in SDHCI with DMA subsystem.

Thanks
Kishon

\
 
 \ /
  Last update: 2019-05-31 07:23    [W:0.225 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site