lkml.org 
[lkml]   [2019]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: imx: Correct pinfunc head file path for i.MX8MM
Date
From: Anson Huang <Anson.Huang@nxp.com>

The i.MX8MM pinfunc head file is located in DT folder, correct it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
index 524a16f..e4e01c0 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
@@ -12,7 +12,7 @@ Required properties in sub-nodes:
- fsl,pins: each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
- <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is
+ <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is
the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini
Reference Manual for detailed CONFIG settings.

--
2.7.4
\
 
 \ /
  Last update: 2019-05-30 06:43    [W:0.331 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site