lkml.org 
[lkml]   [2019]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Stacktrace in ARM32 architecture has jumped the first 2 layers, which may ignore the display of save_stack_trace_tsk.
On Thu, May 30, 2019 at 11:06:39PM +0800, l00383200 wrote:
> Without optimization, both save_stack_trace_tsk and __save_stack_trace
> will have stacktrace information in ARM32.
>
> In this situation, "data.skip += 2" operation will skip the first two layers,
> which may make the stacktrace strange and different from other architectures.
>
> A simple example is as follows:
> In ARM32 architecture:
> [<ffffff80083cb3f8>] proc_pid_stack+0xac/0x12c
> [<ffffff80083c7c70>] proc_single_show+0x5c/0xa8
> [<ffffff800838aca8>] seq_read+0x130/0x420
> [<ffffff8008365c54>] __vfs_read+0x60/0x11c
> [<ffffff80083665dc>] vfs_read+0x8c/0x140
> [<ffffff800836717c>] SyS_read+0x6c/0xcc
> [<ffffff8008202cb8>] __sys_trace_return+0x0/0x4
> [<ffffffffffffffff>] 0xffffffffffffffff
>
> In some other architectures(ARM64):
> [<ffffff8008209be0>] save_stack_trace_tsk+0x0/0xf0
> [<ffffff80083cb3f8>] proc_pid_stack+0xac/0x12c
> [<ffffff80083c7c70>] proc_single_show+0x5c/0xa8
> [<ffffff800838aca8>] seq_read+0x130/0x420
> [<ffffff8008365c54>] __vfs_read+0x60/0x11c
> [<ffffff80083665dc>] vfs_read+0x8c/0x140
> [<ffffff800836717c>] SyS_read+0x6c/0xcc
> [<ffffff8008202cb8>] __sys_trace_return+0x0/0x4
> [<ffffffffffffffff>] 0xffffffffffffffff
>
> Therefore, we'd better just jump only one layer to ensure accuracy and consistency.

Why do we want to log the function we called to save the stack trace
_in_ the stack trace? What useful purpose does it serve?

I've always taken the attitude that if we want a stack trace from a
certain point in the function, then that's the point that the stack
trace should start. It's entirely sensible.

>
> Signed-off-by: liucheng <liucheng32@huawei.com>
> ---
> arch/arm/kernel/stacktrace.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
> index 71778bb..bb3da38 100644
> --- a/arch/arm/kernel/stacktrace.c
> +++ b/arch/arm/kernel/stacktrace.c
> @@ -125,7 +125,7 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
> #endif
> } else {
> /* We don't want this function nor the caller */
> - data.skip += 2;
> + data.skip += 1;
> frame.fp = (unsigned long)__builtin_frame_address(0);
> frame.sp = current_stack_pointer;
> frame.lr = (unsigned long)__builtin_return_address(0);
> --
> 1.8.5.6
>
>

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2019-05-30 18:23    [W:0.037 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site