lkml.org 
[lkml]   [2019]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2] ARM: mach-shmobile: Don't init CNTVOFF if PSCI is available
From
Date

On 03.05.19 14:38, Geert Uytterhoeven wrote:
> Hi Oleksandr,

Hi Geert


>
> On Fri, May 3, 2019 at 1:21 PM Oleksandr Tyshchenko <olekstysh@gmail.com> wrote:
>> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>>
>> If PSCI is available then most likely we are running on PSCI-enabled
>> U-Boot which, we assume, has already taken care of resetting CNTVOFF
>> before switching to non-secure mode and we don't need to.
>>
>> Also, don't init CNTVOFF if we are running on top of Xen hypervisor,
>> as CNTVOFF is controlled by hypervisor itself and shouldn't be touched
>> by Dom0 in such case.
>>
>> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>> CC: Julien Grall <julien.grall@arm.com>
> Thanks for your patch!

Thank you for review!


>
>> ---
>> You can find previous discussion here:
>> https://lkml.org/lkml/2019/4/17/810
>>
>> Changes in v2:
>> - Clarify patch subject/description
>> - Don't use CONFIG_ARM_PSCI option, check whether the PSCI is available,
>> by using psci_smp_available()
>> - Check whether we are running on top of Xen, by using xen_domain()
>> ---
>> arch/arm/mach-shmobile/setup-rcar-gen2.c | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
>> index eea60b2..bc8537b 100644
>> --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
>> +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
>> @@ -17,7 +17,9 @@
>> #include <linux/of.h>
>> #include <linux/of_fdt.h>
>> #include <linux/of_platform.h>
>> +#include <xen/xen.h>
>> #include <asm/mach/arch.h>
>> +#include <asm/psci.h>
>> #include <asm/secure_cntvoff.h>
>> #include "common.h"
>> #include "rcar-gen2.h"
>> @@ -63,7 +65,16 @@ void __init rcar_gen2_timer_init(void)
>> void __iomem *base;
>> u32 freq;
>>
>> - secure_cntvoff_init();
>> + /*
>> + * If PSCI is available then most likely we are running on PSCI-enabled
>> + * U-Boot which, we assume, has already taken care of resetting CNTVOFF
>> + * before switching to non-secure mode and we don't need to.
>> + * Another check is to be sure that we are not running on top of Xen
>> + * hypervisor, as CNTVOFF is controlled by hypervisor itself and
>> + * shouldn't be touched by Dom0 in such case.
>> + */
>> + if (!psci_smp_available() && !xen_domain())
>> + secure_cntvoff_init();
>>
>> if (of_machine_is_compatible("renesas,r8a7745") ||
>> of_machine_is_compatible("renesas,r8a77470") ||
> How do you prevent secure_cntvoff_init() from being called for secondary
> CPUs in arch/arm/mach-shmobile/headsmp-apmu.S?

Good question.


>
> With PSCI, it is not called if "enable-method" in DT is "psci"', so that case
> is covered, I guess.

Yes.

>
> What about XEN? Do you override the "enable-method"?
> If yes, perhaps a check for "renesas,apmu" is more appropriate?

No, I don't override.


The correct way to run Xen would be to use PSCI, so Linux shouldn't do
any platform low level operation with secondary CPU cores (on/off,
reset, etc) by itself when running on top of Xen hypervisor.

As Xen brings available secondary cores up before starting first domain
(Dom0) using PSCI CPU_ON call to FW, and these cores are entered Xen in
Hyp mode, so any attempts from Dom0 to perform CPU power management
directly (using APMU, RST, etc) may result in something not good. I
think that in case when someone wants to run Xen on R-Car Gen2 system
(which is SMP) without PSCI enabled, we need to forbid even trying to
start secondary cores using APMU.

What do you think?


>
> Gr{oetje,eeting}s,
>
> Geert
>
--
Regards,

Oleksandr Tyshchenko

\
 
 \ /
  Last update: 2019-05-03 14:28    [W:0.057 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site