lkml.org 
[lkml]   [2019]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] ARM: dts: Add Avenger96 devicetree support based on STM32MP157A
From
Date
Hi Mani

On 5/3/19 7:31 AM, Manivannan Sadhasivam wrote:
> Add devicetree support for Avenger96 board based on STM32MP157A MPU
> from ST Micro. This board is one of the 96Boards Consumer Edition board
> from Arrow Electronics and has the following features:
>
> SoC: STM32MP157AAC
> PMIC: STPMIC1A
> RAM: 1024 Mbyte @ 533MHz
> Storage: eMMC v4.51: 8 Gbyte
> microSD Socket: UHS-1 v3.01
> Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
> Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
> Bluetooth®v4.2 (BR/EDR/BLE)
> USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
> Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
> LED: 4x User LED, 1x WiFi LED, 1x BT LED
>
> More information about this board can be found in 96Boards website:
> https://www.96boards.org/product/avenger96/
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/stm32mp157a-avenger96.dts | 320 ++++++++++++++++++++
> 2 files changed, 321 insertions(+)
> create mode 100644 arch/arm/boot/dts/stm32mp157a-avenger96.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8a1d0b3f55dd..f1d2f0bfa7c2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -965,6 +965,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
> stm32h743i-eval.dtb \
> stm32h743i-disco.dtb \
> stm32mp157a-dk1.dtb \
> + stm32mp157a-avenger96.dtb \

follow alphabetic order please.

> stm32mp157c-dk2.dtb \
> stm32mp157c-ed1.dtb \
> stm32mp157c-ev1.dtb
> diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> new file mode 100644
> index 000000000000..a3b8af82ac70
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> @@ -0,0 +1,320 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
> +/*
> + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
> + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "stm32mp157c.dtsi"
> +#include "stm32mp157-pinctrl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/mfd/st,stpmic1.h>
> +
> +/ {
> + model = "Arrow Electronics STM32MP157A Avenger96 board";
> + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
> +
> + aliases {
> + ethernet0 = &ethernet0;
> + mmc0 = &sdmmc1;
> + serial0 = &uart4;
> + serial1 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@c0000000 {
> + reg = <0xc0000000 0x40000000>;

you could add device_type = "memory";

> + };
> +
> + led {
> + compatible = "gpio-leds";
> + led1 {
> + label = "green:user1";
> + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + led2 {
> + label = "green:user2";
> + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> +
> + led3 {
> + label = "green:user3";
> + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc1";
> + default-state = "off";
> + };
> +
> + led4 {
> + label = "green:user3";
> + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "none";
> + default-state = "off";
> + panic-indicator;
> + };
> +
> + led5 {
> + label = "yellow:wifi";
> + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tx";
> + default-state = "off";
> + };
> +
> + led6 {
> + label = "blue:bt";
> + gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "bluetooth-power";
> + default-state = "off";
> + };
> + };
> +};
> +
> +&ethernet0 {
> + status = "okay";
> + pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> + pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
> + pinctrl-names = "default", "sleep";
> + phy-mode = "rgmii";
> + max-speed = <1000>;
> + phy-handle = <&phy0>;
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@7 {
> + reg = <7>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins_b>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins_b>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins_a>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +
> + pmic: stpmic@33 {
> + compatible = "st,stpmic1";
> + reg = <0x33>;
> + interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "okay";
> +
> + st,main-control-register = <0x04>;
> + st,vin-control-register = <0xc0>;
> + st,usb-control-register = <0x30>;
> +
> + regulators {
> + compatible = "st,stpmic1-regulators";
> +
> + ldo1-supply = <&v3v3>;
> + ldo2-supply = <&v3v3>;
> + ldo3-supply = <&vdd_ddr>;
> + ldo5-supply = <&v3v3>;
> + ldo6-supply = <&v3v3>;
> + pwr_sw1-supply = <&bst_out>;
> + pwr_sw2-supply = <&bst_out>;
> +
> + vddcore: buck1 {
> + regulator-name = "vddcore";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + vdd_ddr: buck2 {
> + regulator-name = "vdd_ddr";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + vdd: buck3 {
> + regulator-name = "vdd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + st,mask_reset;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + v3v3: buck4 {
> + regulator-name = "v3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-over-current-protection;
> + regulator-initial-mode = <0>;
> + };
> +
> + vdda: ldo1 {
> + regulator-name = "vdda";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + interrupts = <IT_CURLIM_LDO1 0>;
> + interrupt-parent = <&pmic>;
> + };
> +
> + v2v8: ldo2 {
> + regulator-name = "v2v8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + interrupts = <IT_CURLIM_LDO2 0>;
> + interrupt-parent = <&pmic>;
> + };
> +
> + vtt_ddr: ldo3 {
> + regulator-name = "vtt_ddr";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <750000>;
> + regulator-always-on;
> + regulator-over-current-protection;
> + };
> +
> + vdd_usb: ldo4 {
> + regulator-name = "vdd_usb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + interrupts = <IT_CURLIM_LDO4 0>;
> + interrupt-parent = <&pmic>;
> + };
> +
> + vdd_sd: ldo5 {
> + regulator-name = "vdd_sd";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + interrupts = <IT_CURLIM_LDO5 0>;
> + interrupt-parent = <&pmic>;
> + regulator-boot-on;
> + };
> +
> + v1v8: ldo6 {
> + regulator-name = "v1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + interrupts = <IT_CURLIM_LDO6 0>;
> + interrupt-parent = <&pmic>;
> + regulator-enable-ramp-delay = <300000>;
> + };
> +
> + vref_ddr: vref_ddr {
> + regulator-name = "vref_ddr";
> + regulator-always-on;
> + regulator-over-current-protection;
> + };
> +
> + bst_out: boost {
> + regulator-name = "bst_out";
> + interrupts = <IT_OCP_BOOST 0>;
> + interrupt-parent = <&pmic>;
> + };
> +
> + vbus_otg: pwr_sw1 {
> + regulator-name = "vbus_otg";
> + interrupts = <IT_OCP_OTG 0>;
> + interrupt-parent = <&pmic>;
> + regulator-active-discharge;
> + };
> +
> + vbus_sw: pwr_sw2 {
> + regulator-name = "vbus_sw";
> + interrupts = <IT_OCP_SWOUT 0>;
> + interrupt-parent = <&pmic>;
> + regulator-active-discharge;
> + };
> + };
> +
> + onkey {
> + compatible = "st,stpmic1-onkey";
> + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
> + interrupt-names = "onkey-falling", "onkey-rising";
> + status = "okay";
> + };
> +
> + watchdog {
> + compatible = "st,stpmic1-wdt";
> + status = "disabled";
> + };
> + };
> +};
> +
> +&iwdg2 {
> + timeout-sec = <32>;
> + status = "okay";
> +};
> +
> +&rng1 {
> + status = "okay";
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&sdmmc1 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
> + pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> + broken-cd;
> + st,sig-dir;
> + st,neg-edge;
> + st,use-ckin;
> + bus-width = <4>;
> + vmmc-supply = <&vdd_sd>;
> + status = "okay";
> +};
> +
> +&uart4 {
> + /* On Low speed expansion header */
> + label = "LS-UART1";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart4_pins_b>;
> + status = "okay";
> +};
> +
> +&uart7 {
> + /* On Low speed expansion header */
> + label = "LS-UART0";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart7_pins_a>;
> + status = "okay";
> +};
>

\
 
 \ /
  Last update: 2019-05-03 11:02    [W:0.069 / U:7.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site