lkml.org 
[lkml]   [2019]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.9 039/128] w1: fix the resume command API
    Date
    [ Upstream commit 62909da8aca048ecf9fbd7e484e5100608f40a63 ]

    >From the DS2408 datasheet [1]:
    "Resume Command function checks the status of the RC flag and, if it is set,
    directly transfers control to the control functions, similar to a Skip ROM
    command. The only way to set the RC flag is through successfully executing
    the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
    command"

    The function currently works perfectly fine in a multidrop bus, but when we
    have only a single slave connected, then only a Skip ROM is used and Match
    ROM is not called at all. This is leading to problems e.g. with single one
    DS2408 connected, as the Resume Command is not working properly and the
    device is responding with failing results after the Resume Command.

    This commit is fixing this by using a Skip ROM instead in those cases.
    The bandwidth / performance advantage is exactly the same.

    Refs:
    [1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdf

    Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
    Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/w1/w1_io.c | 3 +--
    1 file changed, 1 insertion(+), 2 deletions(-)

    diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
    index f4bc8c100a01b..a3ac582420ec4 100644
    --- a/drivers/w1/w1_io.c
    +++ b/drivers/w1/w1_io.c
    @@ -437,8 +437,7 @@ int w1_reset_resume_command(struct w1_master *dev)
    if (w1_reset_bus(dev))
    return -1;

    - /* This will make only the last matched slave perform a skip ROM. */
    - w1_write_8(dev, W1_RESUME_CMD);
    + w1_write_8(dev, dev->slave_count > 1 ? W1_RESUME_CMD : W1_SKIP_ROM);
    return 0;
    }
    EXPORT_SYMBOL_GPL(w1_reset_resume_command);
    --
    2.20.1


    \
     
     \ /
      Last update: 2019-05-30 05:44    [W:5.366 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site