lkml.org 
[lkml]   [2019]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.14 185/193] scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices
    Date
    [ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ]

    During debug, it was seen that the driver is issuing commands specific to
    SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
    this should not be done.

    Revise the code to stop sending these commands on a SLI4 adapter.

    Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
    Signed-off-by: James Smart <jsmart2021@gmail.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/scsi/lpfc/lpfc_hbadisc.c | 11 ++++++++++-
    1 file changed, 10 insertions(+), 1 deletion(-)

    diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
    index 4962d665b4d21..b970933a218d5 100644
    --- a/drivers/scsi/lpfc/lpfc_hbadisc.c
    +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
    @@ -924,7 +924,11 @@ lpfc_linkdown(struct lpfc_hba *phba)
    }
    }
    lpfc_destroy_vport_work_array(phba, vports);
    - /* Clean up any firmware default rpi's */
    +
    + /* Clean up any SLI3 firmware default rpi's */
    + if (phba->sli_rev > LPFC_SLI_REV3)
    + goto skip_unreg_did;
    +
    mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
    if (mb) {
    lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb);
    @@ -936,6 +940,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
    }
    }

    + skip_unreg_did:
    /* Setup myDID for link up if we are in pt2pt mode */
    if (phba->pport->fc_flag & FC_PT2PT) {
    mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
    @@ -4853,6 +4858,10 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport)
    LPFC_MBOXQ_t *mbox;
    int rc;

    + /* Unreg DID is an SLI3 operation. */
    + if (phba->sli_rev > LPFC_SLI_REV3)
    + return;
    +
    mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
    if (mbox) {
    lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS,
    --
    2.20.1


    \
     
     \ /
      Last update: 2019-05-30 05:29    [W:4.090 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site