lkml.org 
[lkml]   [2019]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [linux-sunxi] [RESEND PATCH] ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
On Tue, May 28, 2019 at 02:58:57PM +0200, Paul Kocialkowski wrote:
> Hi,
>
> On Tue, 2019-05-28 at 09:35 +0300, Priit Laes wrote:
> > Lime2 has battery connector so enable these supplies.
>
> Out of curiosity, what is reported to userspace when no battery is
> attached?

Data from /sys/class/power_supply/axp20x-battery:

[snip]
$ for i in $(ls -1); do echo "cat $i"; cat $i; done

cat capacity
100
cat constant_charge_current
1200000
cat constant_charge_current_max
1200000
cat current_now
0
cat health
Good
cat online
0
cat present
0
cat status
Not charging
cat type
Battery
cat uevent
POWER_SUPPLY_NAME=axp20x-battery
POWER_SUPPLY_PRESENT=0
POWER_SUPPLY_ONLINE=0
POWER_SUPPLY_STATUS=Not charging
POWEROSUPPLY_VOLTAGE_NOW=0
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CON/TANT_CHARGE_CURRENT=1200000
POWER_SUPPLY_CONSTANT_CHARGE_CURRENT_MAX=1200000
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_VOLTAGE_MAXODESIGN=4200000
POWEROSUPPLY_VOLTAGE_MIN_DESIGN=2900000
POWER_SUPPLY_CAPACITY=100
cat voltage_max_design
4200000
cat voltage_min_design
2900000
cat voltage_now
0
[/snip]

> Looks good otherwise:
> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
>
> Cheers,
>
> Paul
>
> > Signed-off-by: Priit Laes <plaes@plaes.org>
> > ---
> > arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > index 9c8eecf4337a..9001b5527615 100644
> > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > @@ -206,6 +206,14 @@
> >
> > #include "axp209.dtsi"
> >
> > +&ac_power_supply {
> > + status = "okay";
> > +};
> > +
> > +&battery_power_supply {
> > + status = "okay";
> > +};
> > +
> > &reg_dcdc2 {
> > regulator-always-on;
> > regulator-min-microvolt = <1000000>;
> > --
> > 2.11.0
> >
> --
> Paul Kocialkowski, Bootlin
> Embedded Linux and kernel engineering
> https://bootlin.com
>

\
 
 \ /
  Last update: 2019-05-28 15:45    [W:0.101 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site