lkml.org 
[lkml]   [2019]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/7] [media] marvell-ccic/mmp: enable clock before accessing registers
Date
The access to REG_CLKCTRL or REG_CTRL1 without the clock enabled hangs
the machine. Enable the clock first.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
drivers/media/platform/marvell-ccic/mmp-driver.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index a1b1d66e34cd..352e67fc1062 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -144,6 +144,7 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
* Turn on power and clocks to the controller.
*/
mmpcam_power_up_ctlr(cam);
+ mcam_clk_enable(mcam);
/*
* Provide power to the sensor.
*/
@@ -157,8 +158,6 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
mdelay(5);

- mcam_clk_enable(mcam);
-
return 0;
}

--
2.21.0
\
 
 \ /
  Last update: 2019-05-28 11:08    [W:0.629 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site