lkml.org 
[lkml]   [2019]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [PATCH] arm64: dts: ls1028a: Add Thermal Monitor Unit node
Date
> -----Original Message-----
> From: Eduardo Valentin <edubezval@gmail.com>
> Sent: 2019年5月29日 10:54
> To: Andy Tang <andy.tang@nxp.com>
> Cc: shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>;
> robh+dt@kernel.org; mark.rutland@arm.com;
> linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-pm@vger.kernel.org;
> daniel.lezcano@linaro.org; rui.zhang@intel.com
> Subject: [EXT] Re: [PATCH] arm64: dts: ls1028a: Add Thermal Monitor Unit
> node
>
> Caution: EXT Email
>
> On Thu, Apr 25, 2019 at 04:26:40PM +0800, Yuantian Tang wrote:
> > The Thermal Monitoring Unit (TMU) monitors and reports the temperature
> > from 2 remote temperature measurement sites located on ls1028a chip.
> > Add TMU dts node to enable this feature.
> >
> > Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
>
> I dont see anything wrong from a thermal standpoint.
>
> Acked-by: Eduardo Valentin <edubezval@gmail.com>
>
> Please get this via your arch tree maintainer to avoid merge conflicts.
Thanks for your review.
The only concern for arch tree maintainer is that "cooling-maps" is a required property.
So I have to add cooling-maps for each zone.
Since there are two thermal zones but only one cooling device, which is cpufreq, I have to
use CPUFREQ as cooling device twice which may cause cooling decision conflict.
The case will get worse when we have 7 thermal zones.
This makes me think "maybe we need to change cooling-maps to an optional property".
In this way, we can put the cooling devices to specific thermal zones and leave the zones without
Cooling devices to do the default action which is reset or poweroff soc.
What's your opinion about this?

BR,
Andy

>
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 114
> > ++++++++++++++++++++++++
> > 1 files changed, 114 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index b045812..a25f5fc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -29,6 +29,7 @@
> > clocks = <&clockgen 1 0>;
> > next-level-cache = <&l2>;
> > cpu-idle-states = <&CPU_PH20>;
> > + #cooling-cells = <2>;
> > };
> >
> > cpu1: cpu@1 {
> > @@ -39,6 +40,7 @@
> > clocks = <&clockgen 1 0>;
> > next-level-cache = <&l2>;
> > cpu-idle-states = <&CPU_PH20>;
> > + #cooling-cells = <2>;
> > };
> >
> > l2: l2-cache {
> > @@ -398,6 +400,118 @@
> > status = "disabled";
> > };
> >
> > + tmu: tmu@1f00000 {
> > + compatible = "fsl,qoriq-tmu";
> > + reg = <0x0 0x1f80000 0x0 0x10000>;
> > + interrupts = <0 23 0x4>;
> > + fsl,tmu-range = <0xb0000 0xa0026 0x80048
> 0x70061>;
> > + fsl,tmu-calibration = <0x00000000 0x00000024
> > + 0x00000001
> 0x0000002b
> > + 0x00000002
> 0x00000031
> > + 0x00000003
> 0x00000038
> > + 0x00000004
> 0x0000003f
> > + 0x00000005
> 0x00000045
> > + 0x00000006
> 0x0000004c
> > + 0x00000007
> 0x00000053
> > + 0x00000008
> 0x00000059
> > + 0x00000009
> 0x00000060
> > + 0x0000000a
> 0x00000066
> > + 0x0000000b
> 0x0000006d
> > +
> > + 0x00010000
> 0x0000001c
> > + 0x00010001
> 0x00000024
> > + 0x00010002
> 0x0000002c
> > + 0x00010003
> 0x00000035
> > + 0x00010004
> 0x0000003d
> > + 0x00010005
> 0x00000045
> > + 0x00010006
> 0x0000004d
> > + 0x00010007
> 0x00000045
> > + 0x00010008
> 0x0000005e
> > + 0x00010009
> 0x00000066
> > + 0x0001000a
> 0x0000006e
> > +
> > + 0x00020000
> 0x00000018
> > + 0x00020001
> 0x00000022
> > + 0x00020002
> 0x0000002d
> > + 0x00020003
> 0x00000038
> > + 0x00020004
> 0x00000043
> > + 0x00020005
> 0x0000004d
> > + 0x00020006
> 0x00000058
> > + 0x00020007
> 0x00000063
> > + 0x00020008
> 0x0000006e
> > +
> > + 0x00030000
> 0x00000010
> > + 0x00030001
> 0x0000001c
> > + 0x00030002
> 0x00000029
> > + 0x00030003
> 0x00000036
> > + 0x00030004
> 0x00000042
> > + 0x00030005
> 0x0000004f
> > + 0x00030006
> 0x0000005b
> > + 0x00030007
> 0x00000068>;
> > + little-endian;
> > + #thermal-sensor-cells = <1>;
> > + };
> > +
> > + thermal-zones {
> > + core-cluster {
> > + polling-delay-passive = <1000>;
> > + polling-delay = <5000>;
> > + thermal-sensors = <&tmu 0>;
> > +
> > + trips {
> > + core_cluster_alert:
> core-cluster-alert {
> > + temperature =
> <85000>;
> > + hysteresis =
> <2000>;
> > + type = "passive";
> > + };
> > +
> > + core_cluster_crit:
> core-cluster-crit {
> > + temperature =
> <95000>;
> > + hysteresis =
> <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip =
> <&core_cluster_alert>;
> > + cooling-device =
> > + <&cpu0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu1
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + ddr-controller {
> > + polling-delay-passive = <1000>;
> > + polling-delay = <5000>;
> > + thermal-sensors = <&tmu 1>;
> > +
> > + trips {
> > + ddr_controller_alert:
> ddr-controller-alert {
> > + temperature =
> <85000>;
> > + hysteresis =
> <2000>;
> > + type = "passive";
> > + };
> > +
> > + ddr_controller_crit:
> ddr-controller-crit {
> > + temperature =
> <95000>;
> > + hysteresis =
> <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip =
> <&ddr_controller_alert>;
> > + cooling-device =
> > + <&cpu0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&cpu1
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > + };
> > +
> > pcie@1f0000000 { /* Integrated Endpoint Root Complex
> */
> > compatible = "pci-host-ecam-generic";
> > reg = <0x01 0xf0000000 0x0 0x100000>;
\
 
 \ /
  Last update: 2019-05-29 05:28    [W:0.066 / U:1.828 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site