lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dpaa_eth: use only online CPU portals
Date
Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 9 ++++-----
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 4 ++--
2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d3f2408dc9e8..f38c3fa7d705 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -780,7 +780,7 @@ static void dpaa_eth_add_channel(u16 channel)
struct qman_portal *portal;
int cpu;

- for_each_cpu(cpu, cpus) {
+ for_each_cpu_and(cpu, cpus, cpu_online_mask) {
portal = qman_get_affine_portal(cpu);
qman_p_static_dequeue_add(portal, pool);
}
@@ -896,7 +896,7 @@ static void dpaa_fq_setup(struct dpaa_priv *priv,
u16 channels[NR_CPUS];
struct dpaa_fq *fq;

- for_each_cpu(cpu, affine_cpus)
+ for_each_cpu_and(cpu, affine_cpus, cpu_online_mask)
channels[num_portals++] = qman_affine_channel(cpu);

if (num_portals == 0)
@@ -2174,7 +2174,6 @@ static int dpaa_eth_poll(struct napi_struct *napi, int budget)
if (cleaned < budget) {
napi_complete_done(napi, cleaned);
qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
-
} else if (np->down) {
qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
}
@@ -2448,7 +2447,7 @@ static void dpaa_eth_napi_enable(struct dpaa_priv *priv)
struct dpaa_percpu_priv *percpu_priv;
int i;

- for_each_possible_cpu(i) {
+ for_each_online_cpu(i) {
percpu_priv = per_cpu_ptr(priv->percpu_priv, i);

percpu_priv->np.down = 0;
@@ -2461,7 +2460,7 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
struct dpaa_percpu_priv *percpu_priv;
int i;

- for_each_possible_cpu(i) {
+ for_each_online_cpu(i) {
percpu_priv = per_cpu_ptr(priv->percpu_priv, i);

percpu_priv->np.down = 1;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index bdee441bc3b7..7ce2e99b594d 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -569,7 +569,7 @@ static int dpaa_set_coalesce(struct net_device *dev,
qman_dqrr_get_ithresh(portal, &prev_thresh);

/* set new values */
- for_each_cpu(cpu, cpus) {
+ for_each_cpu_and(cpu, cpus, cpu_online_mask) {
portal = qman_get_affine_portal(cpu);
res = qman_portal_set_iperiod(portal, period);
if (res)
@@ -586,7 +586,7 @@ static int dpaa_set_coalesce(struct net_device *dev,

revert_values:
/* restore previous values */
- for_each_cpu(cpu, cpus) {
+ for_each_cpu_and(cpu, cpus, cpu_online_mask) {
if (!needs_revert[cpu])
continue;
portal = qman_get_affine_portal(cpu);
--
2.1.0
\
 
 \ /
  Last update: 2019-05-27 14:25    [W:0.032 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site