lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/2] drm/stm: dsi: add power on/off phy ops
Date
These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 01db020..0ab32fe 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -210,10 +210,27 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
if (ret)
DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");

+ return 0;
+}
+
+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+ struct dw_mipi_dsi_stm *dsi = priv_data;
+
+ DRM_DEBUG_DRIVER("\n");
+
/* Enable the DSI wrapper */
dsi_set(dsi, DSI_WCR, WCR_DSIEN);
+}

- return 0;
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+ struct dw_mipi_dsi_stm *dsi = priv_data;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Disable the DSI wrapper */
+ dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
}

static int
@@ -287,6 +304,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,

static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
.init = dw_mipi_dsi_phy_init,
+ .power_on = dw_mipi_dsi_phy_power_on,
+ .power_off = dw_mipi_dsi_phy_power_off,
.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
};

--
2.7.4
\
 
 \ /
  Last update: 2019-05-27 12:24    [W:0.062 / U:0.084 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site