lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/2] dw-mipi-dsi: add power on & off optional phy ops and update stm
Date
These patches fix a bug concerning an access issue to display controler (ltdc)
registers.
If the physical layer of the DSI is started too early then the fifo DSI are full
very quickly which implies ltdc register's access hang up. To avoid this
problem, it is necessary to start the DSI physical layer only when the bridge
is enable.

Yannick Fertré (2):
drm/bridge/synopsys: dsi: add power on/off optional phy ops
drm/stm: dsi: add power on/off phy ops

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 21 ++++++++++++++++++++-
include/drm/bridge/dw_mipi_dsi.h | 2 ++
3 files changed, 30 insertions(+), 1 deletion(-)

--
2.7.4

\
 
 \ /
  Last update: 2019-05-27 12:24    [W:0.089 / U:8.736 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site