lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/komeda: Added AFBC support for komeda driver
On Mon, May 27, 2019 at 06:51:18AM +0000, james qian wang (Arm Technology China) wrote:
> On Fri, May 24, 2019 at 03:12:26PM +0300, Ville Syrjälä wrote:
> > On Fri, May 24, 2019 at 11:10:09AM +0000, Brian Starkey wrote:
> > > Hi,
> > >
> > > On Tue, May 21, 2019 at 09:45:58AM +0100, james qian wang (Arm Technology China) wrote:
> > > > On Thu, May 16, 2019 at 09:57:49PM +0800, Ayan Halder wrote:
> > > > > On Thu, Apr 04, 2019 at 12:06:14PM +0100, james qian wang (Arm Technology China) wrote:
> > > > > >
> > > > > > +static int
> > > > > > +komeda_fb_afbc_size_check(struct komeda_fb *kfb, struct drm_file *file,
> > > > > > + const struct drm_mode_fb_cmd2 *mode_cmd)
> > > > > > +{
> > > > > > + struct drm_framebuffer *fb = &kfb->base;
> > > > > > + const struct drm_format_info *info = fb->format;
> > > > > > + struct drm_gem_object *obj;
> > > > > > + u32 alignment_w = 0, alignment_h = 0, alignment_header;
> > > > > > + u32 n_blocks = 0, min_size = 0;
> > > > > > +
> > > > > > + obj = drm_gem_object_lookup(file, mode_cmd->handles[0]);
> > > > > > + if (!obj) {
> > > > > > + DRM_DEBUG_KMS("Failed to lookup GEM object\n");
> > > > > > + return -ENOENT;
> > > > > > + }
> > > > > > +
> > > > > > + switch (fb->modifier & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> > > > > > + case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
> > > > > > + alignment_w = 32;
> > > > > > + alignment_h = 8;
> > > > > > + break;
> > > > > > + case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> > > > > > + alignment_w = 16;
> > > > > > + alignment_h = 16;
> > > > > > + break;
> > > > > > + default:
> > > > > Can we have something like a warn here ?
> > > >
> > > > will add a WARN here.
> > > >
> > >
> > > I think it's better not to. fb->modifier comes from
> > > userspace, so a malicious app could spam us with WARNs, effectively
> > > dos-ing the system. -EINVAL should be sufficient.
> >
> > Should probably check that the entire modifier+format is
> > actually valid. Otherwise you risk passing on a bogus
> > modifier deeper into the driver which may trigger
> > interesting bugs.
> >
> > Also theoretically (however unlikely) some broken userspace
> > might start to depend on the ability to create framebuffers
> > with crap modifiers, which could later break if you change
> > the way you handle the modifiers. Then you're stuck between
> > the rock and hard place because you can't break existing
> > userspace but you still want to change the way modifiers
> > are handled in the kernel.
> >
> > Best not give userspace too much rope IMO. Two ways to go about
> > that:
> > 1) drm_any_plane_has_format() (assumes your .format_mod_supported()
> > does its job properly)
> > 2) roll your own
> >
> > --
> > Ville Syrjälä
> > Intel
>
> Hi Brian & Ville:
>
> komed has a format+modifier check before the fb size check.
> and for komeda_fb_create, the first step is do the format+modifier
> check, the size check is the furthur check after the such format
> valid check. and the detailed fb_create is like:
>
> struct drm_framebuffer *
> komeda_fb_create(struct drm_device *dev, struct drm_file *file,
> const struct drm_mode_fb_cmd2 *mode_cmd)
> {
> ...
> /* Step 1: format+modifier valid check, if it can not be support,
> * get_format_caps will return a NULL ptr.
> */
> kfb->format_caps = komeda_get_format_caps(&mdev->fmt_tbl,
> mode_cmd->pixel_format,
> mode_cmd->modifier[0]);
> if (!kfb->format_caps) {
> DRM_DEBUG_KMS("FMT %x is not supported.\n",
> mode_cmd->pixel_format);
> kfree(kfb);
> return ERR_PTR(-EINVAL);
> }
>
> drm_helper_mode_fill_fb_struct(dev, &kfb->base, mode_cmd);
>
> /* step 2, do the size check */
> if (kfb->base.modifier)
> ret = komeda_fb_afbc_size_check(kfb, file, mode_cmd);
> else
> ret = komeda_fb_none_afbc_size_check(mdev, kfb, file, mode_cmd);
> if (ret < 0)
> goto err_cleanup;
>
> ...
> }
>
> So theoretically, the WARN in step2 is redundant if get_format_caps
> function has no problem. :). the WARN here is only for reporting
> the kernel BUG or code inconsitent with format caps check and the
> fb size check. And I agree, basically it will not happene.
> @Brian, I'm Ok to remove it. :)
>
> @Ville:
> Basically komeda follow the way-1, but a little improvement for
> matching komeda's requirement. for komeda which will do two level's
> format+modifier check.
> 1). In fb_create, A roughly check to see if the format+modifier can be
> supported by current HW.

Yeah, looks like it shouldn't allow any unspecfied modifiers to
sneak through. So should be good.

> 2). In plane_atomic_check: to see if the format+modifier can be
> supported for a specific layer and with a specific configuration (ROT)
>
> This is a format valid check example for plane_check.
> https://patchwork.freedesktop.org/patch/301140/?series=59747&rev=2
>
> James

--
Ville Syrjälä
Intel

\
 
 \ /
  Last update: 2019-05-27 15:20    [W:0.178 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site