lkml.org 
[lkml]   [2019]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/4] dt-bindings: power: supply: Max17040: Add low level SOC alert threshold
From
Date
On 4/29/19 7:13 PM, Rob Herring wrote:
> On Sun, Apr 14, 2019 at 10:26:33PM -0300, Matheus Castello wrote:
>> For configure low level state of charge threshold alert signaled from
>> max17040 we add "maxim,alert-soc-level" property.
>>
>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
>> ---
>> .../power/supply/max17040_battery.txt | 24 +++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power/supply/max17040_battery.txt
>>
>> diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
>> new file mode 100644
>> index 000000000000..9b2cc67d556f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt
>> @@ -0,0 +1,24 @@
>> +max17040_battery
>> +~~~~~~~~~~~~~~~~
>> +
>> +Required properties :
>> + - compatible : "maxim,max17040" or "maxim,max77836-battery"
>
> This is really a charger, not a battery.
>

max17040 is a fuel gauge, max77836 MUIC has it integrated. Because of
this we use it in the compatible list.

>> +
>> +Optional properties :
>> +- maxim,alert-soc-level : The alert threshold that sets the state of
>> + charge level where an interrupt is generated.
>> + Can be configured from 1 up to 32. If skipped
>> + the power up default value of 4 will be used.
>
> Units? This is a low or high alert? Does a common property make sense
> here?
>

It is a low level alert. I will change the name of the property to
"maxim,alert-low-soc-level" to make this clear and I will put the
percent unit in the description.

I do not find any common property that I can use here, if I am wrong let
me know.

>> +- interrupt-parent : The GPIO bank from the interrupt line.
>
> Drop this. interrupt-parent is implied.

Ok, I will do.

>
>> +- interrupts : Interrupt line see Documentation/devicetree/
>> + bindings/interrupt-controller/interrupts.txt
>> +
>> +Example:
>> +
>> + battery-charger@36 {
>> + compatible = "maxim,max17040";
>> + reg = <0x36>;
>> + maxim,alert-soc-level = <10>;
>> + interrupt-parent = <&gpio7>;
>> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
>
> Usually there are battery properties that need to be described too...
>

I will fix this for "battery-fuel-gauge@36". I will also add the
description for wake-source as optional property.

Thanks.

Best Regards,
Matheus Castello

>> + };
>> --
>> 2.17.0
>>

\
 
 \ /
  Last update: 2019-05-27 01:38    [W:0.078 / U:12.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site