lkml.org 
[lkml]   [2019]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: qcom: Ensure that PERST is asserted for at least 100 ms
On Thu 23 May 12:44 PDT 2019, Niklas Cassel wrote:

> Currently, there is only a 1 ms sleep after asserting PERST.
>
> Reading the datasheets for different endpoints, some require PERST to be
> asserted for 10 ms in order for the endpoint to perform a reset, others
> require it to be asserted for 50 ms.
>
> Several SoCs using this driver uses PCIe Mini Card, where we don't know
> what endpoint will be plugged in.
>
> The PCI Express Card Electromechanical Specification specifies:
> "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
> the power rails achieving specified operating limits."
>
> Add a sleep of 100 ms before deasserting PERST, in order to ensure that
> we are compliant with the spec.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0ed235d560e3..cae24376237c 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1110,6 +1110,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
> if (IS_ENABLED(CONFIG_PCI_MSI))
> dw_pcie_msi_init(pp);
>
> + /* Ensure that PERST has been asserted for at least 100 ms */
> + msleep(100);
> qcom_ep_reset_deassert(pcie);
>
> ret = qcom_pcie_establish_link(pcie);
> --
> 2.21.0
>

\
 
 \ /
  Last update: 2019-05-26 07:49    [W:0.056 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site