lkml.org 
[lkml]   [2019]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] ARM: dts: meson8b: add VDDEE / mali-supply
Date
EC-100 and Odroid-C1 use a "copy" of the VCCK regulator as "VDDEE"
regulator. VDDEE supplies the Mali GPU and various other bits within
the SoC.

The VDDEE regulator is not exclusive to the Mali GPU so it must not
change it's voltage. The GPU OPP table has a fixed voltage for all
frequencies of 1.10V. This matches with what u-boot sets on my EC-100
and Odroid-C1.

Dependencies:
- compile time: patch #4 depends on my other patch "ARM: meson8b-mxq:
better support for the TRONFY MXQ" from [0]
- runtime: we don't want the kernel to change the output of the VDDEE
regulator to the maximum value. Thus the PWM driver has to be able
to read the PWM period and duty cycle from u-boot. This is supported
with my series called "pwm-meson: cleanups and improvements" from [1]


[0] https://patchwork.kernel.org/patch/10960283/
[1] https://patchwork.kernel.org/cover/10961073/


Martin Blumenstingl (4):
ARM: dts: meson8b: add the PWM_D output pin
ARM: dts: meson8b: ec100: add the VDDEE regulator
ARM: dts: meson8b: odroidc1: add the VDDEE regulator
ARM: dts: meson8b: mxq: add the VDDEE regulator

arch/arm/boot/dts/meson8b-ec100.dts | 31 +++++++++++++++++++++++---
arch/arm/boot/dts/meson8b-mxq.dts | 26 ++++++++++++++++++---
arch/arm/boot/dts/meson8b-odroidc1.dts | 27 +++++++++++++++++++---
arch/arm/boot/dts/meson8b.dtsi | 8 +++++++
4 files changed, 83 insertions(+), 9 deletions(-)

--
2.21.0

\
 
 \ /
  Last update: 2019-05-25 21:02    [W:0.076 / U:9.420 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site