lkml.org 
[lkml]   [2019]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] clk: pwm: implement the .get_duty_cycle callback
Date
Commit 9fba738a53dda2 ("clk: add duty cycle support") added support for
getting and setting the duty cycle of a clock. This implements the
get_duty_cycle callback for PWM based clocks so the duty cycle is shown
in the debugfs output (/sys/kernel/debug/clk/clk_summary).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/clk-pwm.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
index 02b472a1f9b0..c0cd6a0ff7f8 100644
--- a/drivers/clk/clk-pwm.c
+++ b/drivers/clk/clk-pwm.c
@@ -47,10 +47,24 @@ static unsigned long clk_pwm_recalc_rate(struct clk_hw *hw,
return clk_pwm->fixed_rate;
}

+static int clk_pwm_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
+{
+ struct clk_pwm *clk_pwm = to_clk_pwm(hw);
+ struct pwm_state state;
+
+ pwm_get_state(clk_pwm->pwm, &state);
+
+ duty->num = state.duty_cycle;
+ duty->den = state.period;
+
+ return 0;
+}
+
static const struct clk_ops clk_pwm_ops = {
.prepare = clk_pwm_prepare,
.unprepare = clk_pwm_unprepare,
.recalc_rate = clk_pwm_recalc_rate,
+ .get_duty_cycle = clk_pwm_get_duty_cycle,
};

static int clk_pwm_probe(struct platform_device *pdev)
--
2.21.0
\
 
 \ /
  Last update: 2019-05-25 20:44    [W:0.046 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site