lkml.org 
[lkml]   [2019]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v2 1/5] net: stmmac: enable clause 45 mdio support
From
Date
Hi Weifeng,

clause45 mdio access with this patch test pass on our platform, thanks!

On Thu, 2019-05-23 at 23:32 +0800, Voon Weifeng wrote:
> From: Kweh Hock Leong <hock.leong.kweh@intel.com>
>
> DWMAC4 is capable to support clause 45 mdio communication.
> This patch enable the feature on stmmac_mdio_write() and
> stmmac_mdio_read() by following phy_write_mmd() and
> phy_read_mmd() mdiobus read write implementation format.
>
> Reviewed-by: Li, Yifan <yifan2.li@intel.com>
> Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
> Signed-off-by: Weifeng Voon <weifeng.voon@intel.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 40 ++++++++++++++++++-----
> include/linux/phy.h | 2 ++
> 2 files changed, 34 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index bdd351597b55..761caaeb3da1 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -34,11 +34,27 @@
>
> #define MII_BUSY 0x00000001
> #define MII_WRITE 0x00000002
> +#define MII_DATA_MASK GENMASK(15, 0)
>
> /* GMAC4 defines */
> #define MII_GMAC4_GOC_SHIFT 2
> +#define MII_GMAC4_REG_ADDR_SHIFT 16
> #define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
> #define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
> +#define MII_GMAC4_C45E BIT(1)
> +
> +static void stmmac_mdio_c45_setup(struct stmmac_priv *priv, int phyreg,
> + u32 *val, u32 *data)
> +{
> + unsigned int reg_mask = priv->hw->mii.reg_mask;
> + unsigned int reg_shift = priv->hw->mii.reg_shift;
> +
> + *val |= MII_GMAC4_C45E;
> + *val &= ~reg_mask;
> + *val |= ((phyreg >> MII_DEVADDR_C45_SHIFT) << reg_shift) & reg_mask;
> +
> + *data |= (phyreg & MII_REGADDR_C45_MASK) << MII_GMAC4_REG_ADDR_SHIFT;
> +}
>
> /* XGMAC defines */
> #define MII_XGMAC_SADDR BIT(18)
> @@ -165,22 +181,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
> struct stmmac_priv *priv = netdev_priv(ndev);
> unsigned int mii_address = priv->hw->mii.addr;
> unsigned int mii_data = priv->hw->mii.data;
> - u32 v;
> - int data;
> u32 value = MII_BUSY;
> + int data = 0;
> + u32 v;
>
> value |= (phyaddr << priv->hw->mii.addr_shift)
> & priv->hw->mii.addr_mask;
> value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
> value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
> & priv->hw->mii.clk_csr_mask;
> - if (priv->plat->has_gmac4)
> + if (priv->plat->has_gmac4) {
> value |= MII_GMAC4_READ;
> + if (phyreg & MII_ADDR_C45)
> + stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> + }
>
> if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
> 100, 10000))
> return -EBUSY;
>
> + writel(data, priv->ioaddr + mii_data);
> writel(value, priv->ioaddr + mii_address);
>
> if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
> @@ -188,7 +208,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
> return -EBUSY;
>
> /* Read the data from the MII data register */
> - data = (int)readl(priv->ioaddr + mii_data);
> + data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
>
> return data;
> }
> @@ -208,8 +228,9 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
> struct stmmac_priv *priv = netdev_priv(ndev);
> unsigned int mii_address = priv->hw->mii.addr;
> unsigned int mii_data = priv->hw->mii.data;
> - u32 v;
> u32 value = MII_BUSY;
> + int data = phydata;
> + u32 v;
>
> value |= (phyaddr << priv->hw->mii.addr_shift)
> & priv->hw->mii.addr_mask;
> @@ -217,10 +238,13 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
>
> value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
> & priv->hw->mii.clk_csr_mask;
> - if (priv->plat->has_gmac4)
> + if (priv->plat->has_gmac4) {
> value |= MII_GMAC4_WRITE;
> - else
> + if (phyreg & MII_ADDR_C45)
> + stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> + } else {
> value |= MII_WRITE;
> + }
>
> /* Wait until any existing MII operation is complete */
> if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
> @@ -228,7 +252,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
> return -EBUSY;
>
> /* Set the MII address register to write */
> - writel(phydata, priv->ioaddr + mii_data);
> + writel(data, priv->ioaddr + mii_data);
> writel(value, priv->ioaddr + mii_address);
>
> /* Wait until any existing MII operation is complete */
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 073fb151b5a9..d3daac8ec686 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -198,6 +198,8 @@ static inline const char *phy_modes(phy_interface_t interface)
> /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
> IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
> #define MII_ADDR_C45 (1<<30)
> +#define MII_DEVADDR_C45_SHIFT 16
> +#define MII_REGADDR_C45_MASK GENMASK(15, 0)
>
> struct device;
> struct phylink;



\
 
 \ /
  Last update: 2019-05-24 10:51    [W:0.066 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site