lkml.org 
[lkml]   [2019]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Qemu-devel] Running linux on qemu omap
From
Date
On 22/05/2019 20.19, Aaro Koskinen wrote:
> Hi,
>
> On Wed, May 22, 2019 at 11:33:41AM +0200, Corentin Labbe wrote:
>> qemu-system-arm -M help |grep OMAP
>> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
>> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
>> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
>> sx1 Siemens SX1 (OMAP310) V2
>> sx1-v1 Siemens SX1 (OMAP310) V1
>>
>>>> The maximum I can get with omap1_defconfig is
>>>> qemu-system-arm -kernel zImage -nographic -machine cheetah -append 'root=/dev/ram0 console=ttyO0'
>>>> Uncompressing Linux... done, booting the kernel.
>>>> then nothing more.
>
> With N800/N810 omap2plus_defconfig should be used instead. However,
> I don't think that works either (but haven't tried recently). Also with
> N800/N810 you need to append the DTB file to the kernel image.

FWIW, Philippe recently posted a mail how to run older kernels on n810:

https://www.mail-archive.com/qemu-devel@nongnu.org/msg610653.html

HTH,
Thomas

\
 
 \ /
  Last update: 2019-05-23 13:29    [W:0.180 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site