lkml.org 
[lkml]   [2019]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v4 1/6] regulator: lm363x: Make the gpio register enable flexible
Date
The use of and enablement of the GPIO can be used across devices.
Use the enable_reg in the regulator descriptor for the register to
write.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/regulator/lm363x-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index c876e161052a..382b1cecdd93 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)

if (gpiod) {
cfg.ena_gpiod = gpiod;
-
- ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
+ ret = regmap_update_bits(regmap,
+ lm363x_regulator_desc[id].enable_reg,
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
--
2.21.0.5.gaeb582a983
\
 
 \ /
  Last update: 2019-05-22 21:46    [W:0.139 / U:1.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site