lkml.org 
[lkml]   [2019]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 13/16] platform/x86: intel_cht_int33fe: Provide software nodes for the devices
Date
Software nodes provide two features that we will need later.
1) Software nodes can have references to other software nodes.
2) Software nodes can exist before a device entry is created.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/platform/x86/intel_cht_int33fe.c | 53 ++++++++++++++++++++----
1 file changed, 45 insertions(+), 8 deletions(-)

diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 4ab47d6df413..a4ebd1d6b5b6 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -27,6 +27,13 @@

#define EXPECTED_PTYPE 4

+enum {
+ INT33FE_NODE_FUSB302,
+ INT33FE_NODE_MAX17047,
+ INT33FE_NODE_PI3USB30532,
+ INT33FE_NODE_MAX,
+};
+
struct cht_int33fe_data {
struct i2c_client *max17047;
struct i2c_client *fusb302;
@@ -72,8 +79,13 @@ static const struct property_entry max17047_props[] = {

static const struct property_entry fusb302_props[] = {
PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
- PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
- PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000),
+ { }
+};
+
+static const struct software_node nodes[] = {
+ { "fusb302", NULL, fusb302_props },
+ { "max17047", NULL, max17047_props },
+ { "pi3usb30532" },
{ }
};

@@ -82,14 +94,17 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
{
struct i2c_client *max17047 = NULL;
struct i2c_board_info board_info;
+ struct fwnode_handle *fwnode;
int ret;

+ fwnode = software_node_fwnode(&nodes[INT33FE_NODE_MAX17047]);
+ if (!fwnode)
+ return -ENODEV;
+
i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
if (max17047) {
/* Pre-existing i2c-client for the max17047, add device-props */
- ret = device_add_properties(&max17047->dev, max17047_props);
- if (ret)
- return ret;
+ max17047->dev.fwnode->secondary = fwnode;
/* And re-probe to get the new device-props applied. */
ret = device_reprobe(&max17047->dev);
if (ret)
@@ -100,7 +115,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
memset(&board_info, 0, sizeof(board_info));
strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
board_info.dev_name = "max17047";
- board_info.properties = max17047_props;
+ board_info.fwnode = fwnode;
data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);

return PTR_ERR_OR_ZERO(data->max17047);
@@ -111,6 +126,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct i2c_board_info board_info;
struct cht_int33fe_data *data;
+ struct fwnode_handle *fwnode;
struct regulator *regulator;
unsigned long long ptyp;
acpi_status status;
@@ -170,10 +186,14 @@ static int cht_int33fe_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;

+ ret = software_node_register_nodes(nodes);
+ if (ret)
+ return ret;
+
/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
ret = cht_int33fe_register_max17047(dev, data);
if (ret)
- return ret;
+ goto out_remove_nodes;

data->connections[0].endpoint[0] = "port0";
data->connections[0].endpoint[1] = "i2c-pi3usb30532-switch";
@@ -187,10 +207,16 @@ static int cht_int33fe_probe(struct platform_device *pdev)

device_connections_add(data->connections);

+ fwnode = software_node_fwnode(&nodes[INT33FE_NODE_FUSB302]);
+ if (!fwnode) {
+ ret = -ENODEV;
+ goto out_unregister_max17047;
+ }
+
memset(&board_info, 0, sizeof(board_info));
strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
board_info.dev_name = "fusb302";
- board_info.properties = fusb302_props;
+ board_info.fwnode = fwnode;
board_info.irq = fusb302_irq;

data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
@@ -199,8 +225,15 @@ static int cht_int33fe_probe(struct platform_device *pdev)
goto out_unregister_max17047;
}

+ fwnode = software_node_fwnode(&nodes[INT33FE_NODE_PI3USB30532]);
+ if (!fwnode) {
+ ret = -ENODEV;
+ goto out_unregister_fusb302;
+ }
+
memset(&board_info, 0, sizeof(board_info));
board_info.dev_name = "pi3usb30532";
+ board_info.fwnode = fwnode;
strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);

data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
@@ -221,6 +254,9 @@ static int cht_int33fe_probe(struct platform_device *pdev)

device_connections_remove(data->connections);

+out_remove_nodes:
+ software_node_unregister_nodes(nodes);
+
return ret;
}

@@ -233,6 +269,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
i2c_unregister_device(data->max17047);

device_connections_remove(data->connections);
+ software_node_unregister_nodes(nodes);

return 0;
}
--
2.20.1
\
 
 \ /
  Last update: 2019-05-22 12:52    [W:0.528 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site