lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] serial: 8250: Add support for 8250/16550 as MFD function
On Tue, May 21, 2019 at 01:11:08PM +0200, Esben Haabendal wrote:
> Greg Kroah-Hartman <gregkh@linuxfoundation.org> writes:
>
> >> I will try ad hold back with this thread until you get back to it.
> >
> > Ok, I have no idea what is going on here, sorry. This is a really long
> > and meandering thread, and I can't even find the original patches in my
> > queue.
> >
> > So can you resend things and we can start over? :)
>
> Will do.
>
> > But note, using a mfd for a uart seems VERY odd to me...
>
> Ok. In my case, I have a pcie card with an fpga which includes 5 uart
> ports, 3 ethernet interfaces and a number of custom IP blocks.
> I believe that an mfd driver for that pcie card in that case.

I believe you need to fix that fpga to expose individual pci devices
such that you can properly bind the individual devices to the expected
drivers :)

Seriously, who makes such a broken fpga device that goes against the PCI
spec that way? Well, not so much as "goes against it", as "ignores all
of the proper ideas of the past 20 years for working with PCI devices".

thanks,

greg k-h

\
 
 \ /
  Last update: 2019-05-21 13:19    [W:0.049 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site