lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V7 06/15] dt-bindings: PCI: designware: Add binding for CDM register check
On Fri, May 17, 2019 at 06:08:37PM +0530, Vidya Sagar wrote:
> Add support to enable CDM (Configuration Dependent Module) registers check
> for any data corruption. CDM registers include standard PCIe configuration
> space registers, Port Logic registers and iATU and DMA registers.
> Refer Section S.4 of Synopsys DesignWare Cores PCI Express Controller Databook
> Version 4.90a
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> Changes since [v6]:
> * Changed "enable-cdm-check" to "snps,enable-cdm-check"
>
> Changes since [v5]:
> * None
>
> Changes since [v4]:
> * None
>
> Changes since [v3]:
> * None
>
> Changes since [v2]:
> * Changed flag name from 'cdm-check' to 'enable-cdm-check'
> * Added info about Port Logic and DMA registers being part of CDM
>
> Changes since [v1]:
> * This is a new patch in v2 series
>
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 5 +++++
> 1 file changed, 5 insertions(+)

Reviewed-by: Thierry Reding <treding@nvidia.com>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-05-21 12:38    [W:0.234 / U:12.868 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site