lkml.org 
[lkml]   [2019]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: drm/komeda: Adds zorder support
Date
On Mon, May 20, 2019 at 03:33:19AM +0000, Lowry Li (Arm Technology China) wrote:
> - Creates the zpos property.
> - Implement komeda_crtc_normalize_zpos to replace
> drm_atomic_normalize_zpos, reasons as the following:
>
> 1. The drm_atomic_normalize_zpos allows to configure same zpos for
> different planes, but komeda doesn't support such configuration.
> 2. For further slave pipline case, Komeda need to calculate the
> max_slave_zorder, we will merge such calculation into
> komed_crtc_normalize_zpos to save a separated plane_state loop.
> 3. For feature none-scaling layer_split, which a plane_state will be
> assigned to two individual layers(left/right), which requires two
> normalize_zpos for this plane, plane_st->normalize_zpos will be used
> by left layer, normalize_zpos + 1 for right_layer.
>
> This patch series depends on:
> - https://patchwork.freedesktop.org/series/58710/
> - https://patchwork.freedesktop.org/series/59000/
> - https://patchwork.freedesktop.org/series/59002/
> - https://patchwork.freedesktop.org/series/59747/
> - https://patchwork.freedesktop.org/series/59915/
> - https://patchwork.freedesktop.org/series/60083/
> - https://patchwork.freedesktop.org/series/60698/
>
> Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
> ---
> drivers/gpu/drm/arm/display/komeda/komeda_kms.c | 90 ++++++++++++++++++++++-
> drivers/gpu/drm/arm/display/komeda/komeda_kms.h | 3 +
> drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 6 +-
> 3 files changed, 97 insertions(+), 2 deletions(-)
>
> --
> 1.9.1
>
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> index 306ea06..0ec7665 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> @@ -100,6 +100,90 @@ static void komeda_kms_commit_tail(struct drm_atomic_state *old_state)
> .atomic_commit_tail = komeda_kms_commit_tail,
> };
>
> +static int komeda_plane_state_list_add(struct drm_plane_state *plane_st,
> + struct list_head *zorder_list)
> +{
> + struct komeda_plane_state *new = to_kplane_st(plane_st);
> + struct komeda_plane_state *node, *last;
> +
> + last = list_empty(zorder_list) ?
> + NULL : list_last_entry(zorder_list, typeof(*last), zlist_node);
> +
> + /* Considering the list sequence is zpos increasing, so if list is empty
> + * or the zpos of new node bigger than the last node in list, no need
> + * loop and just insert the new one to the tail of the list.
> + */
> + if (!last || (new->base.zpos > last->base.zpos)) {
> + list_add_tail(&new->zlist_node, zorder_list);
> + return 0;
> + }
> +
> + /* Build the list by zpos increasing */
> + list_for_each_entry(node, zorder_list, zlist_node) {
> + if (new->base.zpos < node->base.zpos) {
> + list_add_tail(&new->zlist_node, &node->zlist_node);
> + break;
> + } else if (node->base.zpos == new->base.zpos) {
> + struct drm_plane *a = node->base.plane;
> + struct drm_plane *b = new->base.plane;
> +
> + /* Komeda doesn't support setting a same zpos for
> + * different planes.
> + */
> + DRM_DEBUG_ATOMIC("PLANE: %s and PLANE: %s are configured same zpos: %d.\n",
> + a->name, b->name, node->base.zpos);
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc,
> + struct drm_crtc_state *crtc_st)
> +{
> + struct drm_atomic_state *state = crtc_st->state;
> + struct komeda_plane_state *kplane_st;
> + struct drm_plane_state *plane_st;
> + struct drm_framebuffer *fb;
> + struct drm_plane *plane;
> + struct list_head zorder_list;
> + int order = 0, err;
> +
> + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n",
> + crtc->base.id, crtc->name);
> +
> + INIT_LIST_HEAD(&zorder_list);
> +
> + /* This loop also added all effected planes into the new state */
> + drm_for_each_plane_mask(plane, crtc->dev, crtc_st->plane_mask) {
> + plane_st = drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_st))
> + return PTR_ERR(plane_st);
> +
> + /* Build a list by zpos increasing */
> + err = komeda_plane_state_list_add(plane_st, &zorder_list);
> + if (err)
> + return err;
> + }
> +
> + list_for_each_entry(kplane_st, &zorder_list, zlist_node) {
> + plane_st = &kplane_st->base;
> + fb = plane_st->fb;
> + plane = plane_st->plane;
> +
> + plane_st->normalized_zpos = order++;
> +
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] zpos:%d, normalized zpos: %d\n",
> + plane->base.id, plane->name,
> + plane_st->zpos, plane_st->normalized_zpos);
> + }
> +
> + crtc_st->zpos_changed = true;
> +
> + return 0;
> +}
> +
> static int komeda_kms_check(struct drm_device *dev,
> struct drm_atomic_state *state)
> {
> @@ -111,7 +195,7 @@ static int komeda_kms_check(struct drm_device *dev,
> if (err)
> return err;
>
> - /* komeda need to re-calculate resource assumption in every commit
> + /* Komeda need to re-calculate resource assumption in every commit
> * so need to add all affected_planes (even unchanged) to
> * drm_atomic_state.
> */
> @@ -119,6 +203,10 @@ static int komeda_kms_check(struct drm_device *dev,
> err = drm_atomic_add_affected_planes(state, crtc);
> if (err)
> return err;
> +
> + err = komeda_crtc_normalize_zpos(crtc, new_crtc_st);
> + if (err)
> + return err;
> }
>
> err = drm_atomic_helper_check_planes(dev, state);
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> index 178bee6..d1cef46 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> @@ -7,6 +7,7 @@
> #ifndef _KOMEDA_KMS_H_
> #define _KOMEDA_KMS_H_
>
> +#include <linux/list.h>
> #include <drm/drm_atomic.h>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_crtc_helper.h>
> @@ -46,6 +47,8 @@ struct komeda_plane {
> struct komeda_plane_state {
> /** @base: &drm_plane_state */
> struct drm_plane_state base;
> + /** @zlist_node: zorder list node */
> + struct list_head zlist_node;
>
> /* @img_enhancement: on/off image enhancement */
> u8 img_enhancement : 1;
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> index bcf30a7..aad7663 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
> @@ -21,7 +21,7 @@
>
> memset(dflow, 0, sizeof(*dflow));
>
> - dflow->blending_zorder = st->zpos;
> + dflow->blending_zorder = st->normalized_zpos;
>
> /* if format doesn't have alpha, fix blend mode to PIXEL_NONE */
> dflow->pixel_blend_mode = fb->format->has_alpha ?
> @@ -343,6 +343,10 @@ static int komeda_plane_add(struct komeda_kms_dev *kms,
> if (err)
> goto cleanup;
>
> + err = drm_plane_create_zpos_property(plane, layer->base.id, 0, 8);
> + if (err)
> + goto cleanup;
> +
> return 0;
> cleanup:
> komeda_plane_destroy(plane);

Looks good to me.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>

\
 
 \ /
  Last update: 2019-05-20 08:06    [W:0.082 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site