lkml.org 
[lkml]   [2019]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/7] dt-bindings: Add panel-timing subnode to simple-panel
Thierry,

On Mon, Apr 8, 2019 at 7:39 AM Doug Anderson <dianders@chromium.org> wrote:
>
> Thierry,
>
> On Mon, Apr 8, 2019 at 3:32 AM Thierry Reding <thierry.reding@gmail.com> wrote:
> >
> > On Mon, Apr 01, 2019 at 10:17:18AM -0700, Douglas Anderson wrote:
> > > From: Sean Paul <seanpaul@chromium.org>
> > >
> > > This patch adds a new subnode to simple-panel allowing us to override
> > > the typical timing expressed in the panel's display_timing.
> > >
> > > Changes in v2:
> > > - Split out the binding into a new patch (Rob)
> > > - display-timings is a new section (Rob)
> > > - Use the full display-timings subnode instead of picking the timing
> > > out (Rob/Thierry)
> > > Changes in v3:
> > > - Go back to using the timing subnode directly, but rename to
> > > panel-timing (Rob)
> > > Changes in v4:
> > > - Simplify desc. for when override should be used (Thierry/Laurent)
> > > - Removed Rob H review since it's been a year and wording changed
> > > Changes in v5:
> > > - Removed bit about OS may ignore (Rob/Ezequiel)
> > >
> > > Cc: Doug Anderson <dianders@chromium.org>
> > > Cc: Eric Anholt <eric@anholt.net>
> > > Cc: Heiko Stuebner <heiko@sntech.de>
> > > Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
> > > Cc: Rob Herring <robh+dt@kernel.org>
> > > Cc: Stéphane Marchesin <marcheu@chromium.org>
> > > Cc: Thierry Reding <thierry.reding@gmail.com>
> > > Cc: devicetree@vger.kernel.org
> > > Cc: dri-devel@lists.freedesktop.org
> > > Cc: linux-rockchip@lists.infradead.org
> > > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > > ---
> > >
> > > .../bindings/display/panel/simple-panel.txt | 22 +++++++++++++++++++
> > > 1 file changed, 22 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> > > index b2b872c710f2..93882268c0b9 100644
> > > --- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> > > +++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> > > @@ -15,6 +15,16 @@ Optional properties:
> > > (hot plug detect) signal, but the signal isn't hooked up so we should
> > > hardcode the max delay from the panel spec when powering up the panel.
> > >
> > > +panel-timing subnode
> >
> > Is there any reason why we need the panel- prefix? This is already part
> > of a panel definition, so it's completely redundant. Why not just name
> > the subnode "timing"?
>
> It was a really long time ago since this patch series was idle for a
> while, but you previous had similar feedback in v3 but ended up OK
> with it. See:
>
> https://patchwork.kernel.org/patch/10207583/
>
> I believe the original node name came out of some back and forth
> between Rob and Sean. As far as I can tell, the context is back in
> <https://patchwork.kernel.org/patch/10203483/>. I think Rob wanted it
> to follow other similar node names.
>
>
> That all being said, if you feel strongly about it being called
> "timing" and Rob's OK w/ that too then I'll re-spin the series.

With 5.2-rc1 out, maybe this series is ready to land? If you'd like
me to change things as per above I can. ...but it feels like keeping
the already-agreed-upon name might be easiest / best? Presumably
you'd land patches 1, 2, 4, and 5 and then Heiko could land the dts
patches?

Thanks!

-Doug

\
 
 \ /
  Last update: 2019-05-20 20:36    [W:1.375 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site