lkml.org 
[lkml]   [2019]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] Re: [PATCH v5 2/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
From
Date

El 2/5/19 a las 04:38, Maxime Ripard escribió:
> On Tue, Apr 23, 2019 at 02:25:59PM -0300, Pablo Greco wrote:
>> The bananapi-m2-berry has the PMIC providing voltage to all the pin-bank
>> supply rails from its various regulator outputs, tie them to the pio
>> node.
>>
>> Signed-off-by: Pablo Greco <pgreco@centosproject.org>
>> ---
>> arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> index f05cabd..2cb2ce0 100644
>> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> @@ -123,6 +123,16 @@
>> status = "okay";
>> };
>>
>> +&pio {
>> + pinctrl-names = "default";
> A pinctrl-names property without any other one?
>
> Looks good otherwise, thanks
> Maxime
Right, I'll move this to the patch that adds pinctrl-0
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
Pablo

\
 
 \ /
  Last update: 2019-05-02 12:24    [W:0.047 / U:22.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site