lkml.org 
[lkml]   [2019]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/18] clk: imx6q: Do not reparent uninitialized IMX6QDL_CLK_PERIPH2 clock
Date
The clock is registered later than these two re-parentings.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
drivers/clk/imx/clk-imx6q.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 708e7c5..c7b671e 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -291,12 +291,6 @@ static void mmdc_ch1_disable(void __iomem *ccm_base)
clk_set_parent(clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL],
clk[IMX6QDL_CLK_PLL3_USB_OTG]);

- /*
- * Handshake with mmdc_ch1 module must be masked when changing
- * periph2_clk_sel.
- */
- clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_CLK2]);
-
/* Disable pll3_sw_clk by selecting the bypass clock source */
reg = readl_relaxed(ccm_base + CCM_CCSR);
reg |= CCSR_PLL3_SW_CLK_SEL;
@@ -311,8 +305,6 @@ static void mmdc_ch1_reenable(void __iomem *ccm_base)
reg = readl_relaxed(ccm_base + CCM_CCSR);
reg &= ~CCSR_PLL3_SW_CLK_SEL;
writel_relaxed(reg, ccm_base + CCM_CCSR);
-
- clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_PRE]);
}

/*
--
2.7.4
\
 
 \ /
  Last update: 2019-05-02 10:08    [W:0.248 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site