lkml.org 
[lkml]   [2019]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: iio: accel: adxl372: switch to YAML bindings
On Sat, 18 May 2019 18:55:42 -0300
Lucas Oshiro <lucasseikioshiro@gmail.com> wrote:

> Convert the old device tree documentation to yaml format.
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> ---
>
> Hello,
> We've added Stefan Popa as maintainer of the yaml documentation of this driver
> because we found through git that he was the author of the older documentation.

Definitely going to need an Ack from Stefan for that ;)

I've not really gotten yaml formats into my head yet, but from a quick
look I think this is fine. I will however be looking for review from others
on these.

Thanks,

Jonathan

>
> .../bindings/iio/accel/adi,adxl372.yaml | 66 +++++++++++++++++++
> .../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
> 2 files changed, 66 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> new file mode 100644
> index 000000000000..a6e2893d2ab1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> +
> +maintainers:
> + - Stefan Popa <stefan.popa@analog.com>
> +
> +description: |
> + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
> + both I2C & SPI interfaces
> + https://www.analog.com/en/products/adxl372.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adxl372
> +
> + reg:
> + description: the I2C address or SPI chip select number for the device
> + maxItems: 1
> +
> + interrupts:
> + description:
> + interrupt mapping for IRQ as documented in
> + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Example for a I2C device node */
> + accelerometer@53 {
> + compatible = "adi,adxl372";
> + reg = <0x53>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + accelerometer@0 {
> + compatible = "adi,adxl372";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> deleted file mode 100644
> index a289964756a7..000000000000
> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> -
> -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
> -
> -Required properties:
> - - compatible : should be "adi,adxl372"
> - - reg: the I2C address or SPI chip select number for the device
> -
> -Required properties for SPI bus usage:
> - - spi-max-frequency: Max SPI frequency to use
> -
> -Optional properties:
> - - interrupts: interrupt mapping for IRQ as documented in
> - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -
> -Example for a I2C device node:
> -
> - accelerometer@53 {
> - compatible = "adi,adxl372";
> - reg = <0x53>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };
> -
> -Example for a SPI device node:
> -
> - accelerometer@0 {
> - compatible = "adi,adxl372";
> - reg = <0>;
> - spi-max-frequency = <1000000>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };

\
 
 \ /
  Last update: 2019-05-19 19:23    [W:0.058 / U:4.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site