lkml.org 
[lkml]   [2019]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[v4 3/5] drm/mediatek: add mt8183 dpi dual edge support
    Date
    Add mt8183 dual edge support.
    DPI sample the data both rising and falling edge.
    It can reduce half data io pins.

    Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
    ---
    drivers/gpu/drm/mediatek/mtk_dpi.c | 19 +++++++++++++++++++
    1 file changed, 19 insertions(+)

    diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
    index ccef3ac1c560..77e6e0f99188 100644
    --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
    +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
    @@ -682,6 +682,16 @@ static unsigned int mt2701_calculate_factor(int clock)
    return 2;
    }

    +static unsigned int mt8183_calculate_factor(int clock)
    +{
    + if (clock <= 27000)
    + return 8;
    + else if (clock <= 167000)
    + return 4;
    + else
    + return 2;
    +}
    +
    static const struct mtk_dpi_conf mt8173_conf = {
    .cal_factor = mt8173_calculate_factor,
    .reg_h_fre_con = 0xe0,
    @@ -693,6 +703,12 @@ static const struct mtk_dpi_conf mt2701_conf = {
    .edge_sel_en = true,
    };

    +static const struct mtk_dpi_conf mt8183_conf = {
    + .cal_factor = mt8183_calculate_factor,
    + .reg_h_fre_con = 0xe0,
    + .dual_edge = true,
    +};
    +
    static int mtk_dpi_probe(struct platform_device *pdev)
    {
    struct device *dev = &pdev->dev;
    @@ -788,6 +804,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
    { .compatible = "mediatek,mt8173-dpi",
    .data = &mt8173_conf,
    },
    + { .compatible = "mediatek,mt8183-dpi",
    + .data = &mt8183_conf,
    + },
    { },
    };

    --
    2.21.0
    \
     
     \ /
      Last update: 2019-05-18 11:57    [W:2.831 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site