lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] watchdog/hpwdt: Update documentation
Date
Update documentation to explain new module parameter kdumptimeout.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
---
Documentation/watchdog/hpwdt.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 55df692..35da141 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -33,6 +33,10 @@ Last reviewed: 08/20/2018
Default value is set when compiling the kernel. If it is set
to "Y", then there is no way of disabling the watchdog once
it has been started.
+ kdumptimeout Minimum timeout in seconds to apply upon receipt of an NMI
+ before calling panic. (-1) disables the watchdog. When value
+ is > 0, the timer is reprogrammed with the greater of
+ value or current timeout value.

NOTE: More information about watchdog drivers in general, including the ioctl
interface to /dev/watchdog can be found in
--
1.8.3.1
\
 
 \ /
  Last update: 2019-05-17 23:03    [W:0.060 / U:3.648 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site