lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional
Date
nand-ecc-strength and nand-ecc-step-size can be made optional as
brcmanand driver can support using the nand_base driver detected
values.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index bcda1df..29feaba 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -101,10 +101,10 @@ Required properties:
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
-- nand-ecc-strength : see nand.txt
-- nand-ecc-step-size : must be 512 or 1024. See nand.txt

Optional properties:
+- nand-ecc-strength : see nand.txt
+- nand-ecc-step-size : must be 512 or 1024. See nand.txt
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
chip-select. See nand.txt
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
--
1.9.0.138.g2de3478
\
 
 \ /
  Last update: 2019-05-17 20:34    [W:0.061 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site