lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [Intel-wired-lan] i40e X722 RSS problem with NAT-Traversal IPsec packets
From
On Fri, May 17, 2019 at 09:42:19AM -0700, Alexander Duyck wrote:
> So the patch below/attached should resolve the issues you are seeing
> with your system in terms of UDPv4 RSS. What you should see with this
> patch is the first function to come up will display some "update input
> mask" messages, and then the remaining functions shouldn't make any
> noise about it since the registers being updated are global to the
> device.
>
> If you can test this and see if it resolves the UDPv4 RSS issues I
> would appreciate it.
>
> Thanks.
>
> - Alex
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 65c2b9d2652b..c0a7f66babd9 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -10998,6 +10998,58 @@ static int i40e_pf_config_rss(struct i40e_pf *pf)
> ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
> hena |= i40e_pf_get_default_rss_hena(pf);
>
> + for (ret = 64; ret--;) {
> + u64 hash_inset_orig, hash_inset_update;
> +
> + if (!(hena & (1ull << ret)))
> + continue;
> +
> + /* Read initial input set value for flow type */
> + hash_inset_orig = i40e_read_rx_ctl(hw,
> I40E_GLQF_HASH_INSET(1, ret));
> + hash_inset_orig <<= 32;
> + hash_inset_orig |= i40e_read_rx_ctl(hw,
> I40E_GLQF_HASH_INSET(0, ret));
> +
> + /* Copy value so we can compare later */
> + hash_inset_update = hash_inset_orig;
> +
> + /* We should be looking at either the entire IPv6 or IPv4
> + * mask being set. If only part of the IPv6 mask is set, but
> + * the IPv4 mask is not then we have a garbage mask value
> + * and need to reset it.
> + */
> + switch (hash_inset_orig & I40E_L3_V6_SRC_MASK) {
> + case I40E_L3_V6_SRC_MASK:
> + case I40E_L3_SRC_MASK:
> + case 0:
> + break;
> + default:
> + hash_inset_update &= ~I40E_L3_V6_SRC_MASK;
> + hash_inset_update |= I40E_L3_SRC_MASK;
> + }
> +
> + switch (hash_inset_orig & I40E_L3_V6_DST_MASK) {
> + case I40E_L3_V6_DST_MASK:
> + case I40E_L3_DST_MASK:
> + case 0:
> + break;
> + default:
> + hash_inset_update &= ~I40E_L3_V6_DST_MASK;
> + hash_inset_update |= I40E_L3_DST_MASK;
> + }
> +
> + if (hash_inset_update != hash_inset_orig) {
> + dev_warn(&pf->pdev->dev,
> + "flow type: %d update input mask
> from:0x%016llx, to:0x%016llx\n",
> + ret,
> + hash_inset_orig, hash_inset_update);
> + i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, ret),
> + (u32)hash_inset_update);
> + hash_inset_update >>= 32;
> + i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, ret),
> + (u32)hash_inset_update);
> + }
> + }
> +
> i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
> i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));

> i40e: Debug hash inputs
>
> From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
>
>
> ---
> drivers/net/ethernet/intel/i40e/i40e_main.c | 52 +++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 65c2b9d2652b..c0a7f66babd9 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -10998,6 +10998,58 @@ static int i40e_pf_config_rss(struct i40e_pf *pf)
> ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
> hena |= i40e_pf_get_default_rss_hena(pf);
>
> + for (ret = 64; ret--;) {
> + u64 hash_inset_orig, hash_inset_update;
> +
> + if (!(hena & (1ull << ret)))
> + continue;
> +
> + /* Read initial input set value for flow type */
> + hash_inset_orig = i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, ret));
> + hash_inset_orig <<= 32;
> + hash_inset_orig |= i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, ret));
> +
> + /* Copy value so we can compare later */
> + hash_inset_update = hash_inset_orig;
> +
> + /* We should be looking at either the entire IPv6 or IPv4
> + * mask being set. If only part of the IPv6 mask is set, but
> + * the IPv4 mask is not then we have a garbage mask value
> + * and need to reset it.
> + */
> + switch (hash_inset_orig & I40E_L3_V6_SRC_MASK) {
> + case I40E_L3_V6_SRC_MASK:
> + case I40E_L3_SRC_MASK:
> + case 0:
> + break;
> + default:
> + hash_inset_update &= ~I40E_L3_V6_SRC_MASK;
> + hash_inset_update |= I40E_L3_SRC_MASK;
> + }
> +
> + switch (hash_inset_orig & I40E_L3_V6_DST_MASK) {
> + case I40E_L3_V6_DST_MASK:
> + case I40E_L3_DST_MASK:
> + case 0:
> + break;
> + default:
> + hash_inset_update &= ~I40E_L3_V6_DST_MASK;
> + hash_inset_update |= I40E_L3_DST_MASK;
> + }
> +
> + if (hash_inset_update != hash_inset_orig) {
> + dev_warn(&pf->pdev->dev,
> + "flow type: %d update input mask from:0x%016llx, to:0x%016llx\n",
> + ret,
> + hash_inset_orig, hash_inset_update);
> + i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, ret),
> + (u32)hash_inset_update);
> + hash_inset_update >>= 32;
> + i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, ret),
> + (u32)hash_inset_update);
> + }
> + }
> +
> i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
> i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
>

OK I applied that and see this:

i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.7-k
i40e: Copyright (c) 2013 - 2014 Intel Corporation.
i40e 0000:3d:00.0: fw 3.10.52896 api 1.6 nvm 4.00 0x80001577 1.1767.0
i40e 0000:3d:00.0: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
i40e 0000:3d:00.0: MAC address: a4:bf:01:4e:0c:87
i40e 0000:3d:00.0: flow type: 36 update input mask from:0x0006060000000000, to:0x0001801800000000
i40e 0000:3d:00.0: flow type: 35 update input mask from:0x0006060000000000, to:0x0001801800000000
i40e 0000:3d:00.0: flow type: 34 update input mask from:0x0006060780000000, to:0x0001801f80000000
i40e 0000:3d:00.0: flow type: 33 update input mask from:0x0006060600000000, to:0x0001801e00000000
i40e 0000:3d:00.0: flow type: 32 update input mask from:0x0006060600000000, to:0x0001801e00000000
i40e 0000:3d:00.0: flow type: 31 update input mask from:0x0006060600000000, to:0x0001801e00000000
i40e 0000:3d:00.0: flow type: 30 update input mask from:0x0006060600000000, to:0x0001801e00000000
i40e 0000:3d:00.0: flow type: 29 update input mask from:0x0006060600000000, to:0x0001801e00000000
i40e 0000:3d:00.0: Features: PF-id[0] VSIs: 34 QP: 12 TXQ: 13 RSS VxLAN Geneve VEPA
i40e 0000:3d:00.1: fw 3.10.52896 api 1.6 nvm 4.00 0x80001577 1.1767.0
i40e 0000:3d:00.1: The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.
i40e 0000:3d:00.1: MAC address: a4:bf:01:4e:0c:88
i40e 0000:3d:00.1: Features: PF-id[1] VSIs: 34 QP: 12 TXQ: 13 RSS VxLAN Geneve VEPA
i40e 0000:3d:00.1 eth2: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None

Unfortunately (much to my disappointment, I hoped it would work) I see
no change in behaviour.

--
Len Sorensen

\
 
 \ /
  Last update: 2019-05-17 19:24    [W:0.084 / U:54.776 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site