lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Fix LED GPIO trigger behavior
From
Date
Cc Linus Walleij and leds-gpio@vger.kernel.org.

On 5/16/19 11:42 PM, Kun Yi wrote:
> *** BLURB HERE ***
> Hello there,
>
> I recently tested ledtrig-gpio on an embedded controller and one of the
> issues I had involve not requesting the user input pin as GPIO.
>
> In many embedded systems, a pin could be muxed as several functions, and
> requesting the pin as GPIO is necessary to let pinmux select the pin as
> a GPIO instead of, say an I2C pin. I'd like to learn whether it is appropriate
> to assume user of ledtrig-gpio really intends to use GPIOs and not some
> weird pins that are used as other functions.
>
> Kun Yi (2):
> ledtrig-gpio: Request user input pin as GPIO
> ledtrig-gpio: 0 is a valid GPIO number
>
> drivers/leds/trigger/ledtrig-gpio.c | 35 ++++++++++++++++++++---------
> 1 file changed, 24 insertions(+), 11 deletions(-)
>

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2019-05-17 18:57    [W:0.048 / U:32.600 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site