lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv1 4/8] arm64: dts: qcom: msm8916: Use more generic idle state names
From
Date
On 10/05/2019 13:29, Amit Kucheria wrote:
> Instead of using Qualcomm-specific terminology, use generic node names
> for the idle states that are easier to understand. Move the description
> into the "idle-state-name" property.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>


> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index ded1052e5693..400b609bb3fd 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -110,7 +110,7 @@
> reg = <0x0>;
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> - cpu-idle-states = <&CPU_SPC>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> @@ -122,7 +122,7 @@
> reg = <0x1>;
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> - cpu-idle-states = <&CPU_SPC>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> @@ -134,7 +134,7 @@
> reg = <0x2>;
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> - cpu-idle-states = <&CPU_SPC>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> @@ -146,7 +146,7 @@
> reg = <0x3>;
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> - cpu-idle-states = <&CPU_SPC>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> clocks = <&apcs>;
> operating-points-v2 = <&cpu_opp_table>;
> #cooling-cells = <2>;
> @@ -160,8 +160,9 @@
> idle-states {
> entry-method="psci";
>
> - CPU_SPC: spc {
> + CPU_SLEEP_0: cpu-sleep-0 {
> compatible = "arm,idle-state";
> + idle-state-name = "standalone-power-collapse";
> arm,psci-suspend-param = <0x40000002>;
> entry-latency-us = <130>;
> exit-latency-us = <150>;
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-05-17 17:41    [W:0.191 / U:0.340 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site