[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 2/2] mtd: nand: raw: brcmnand: When oops in progress use pio and interrupt polling
On Fri, May 17, 2019 at 4:12 AM Richard Weinberger
<> wrote:
> On Thu, May 16, 2019 at 6:42 PM Kamal Dasu <> wrote:
> >
> > If mtd_oops is in progress, switch to polling during NAND command
> > completion instead of relying on DMA/interrupts so that the mtd_oops
> > buffer can be completely written in the assigned NAND partition.
> With the new flag the semantics change, as soon a panic write happened,
> the flag will stay and *all* future operates will take the polling/pio path.

Yes that is true.

> IMHO this is fine since the kernel cannot recover from an oops.
> But just to make sure we all get this. :-)
> An alternative would be to block all further non-panic writes.

Capturing the panic writes into an mtd device reliably is what the low
level driver is trying to do.If there are non panic writes they will
use pio and interrupt polling as well in this case.

> --
> Thanks,
> //richard


 \ /
  Last update: 2019-05-17 13:57    [W:0.051 / U:9.080 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site