lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] arm64: dts: ls1028a: Add USB dt nodes
Date
This patch adds USB dt nodes for LS1028A.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Changes in v4:
- Move nodes to follow rule of unit-address in the address.
- Use macro to replace 'interrupts' values.

Changes in v3:
- Add space between label and node name.
- Add spcae with properties and '='.
- Add SoC specific compatible.

Changes in v2:
- Rename node from usb3@... to usb@... to meet DTSpec

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 8dd3501..e4ed17f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -294,6 +294,26 @@
status = "disabled";
};

+ usb0: usb@3100000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ usb1: usb@3110000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1028a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
1.7.1
\
 
 \ /
  Last update: 2019-05-17 07:15    [W:0.199 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site