lkml.org 
[lkml]   [2019]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5] ARM: mach-shmobile: Don't init CNTVOFF/counter if PSCI is available
Date
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>

If PSCI is available then most likely we are running on PSCI-enabled
U-Boot which, we assume, has already taken care of resetting CNTVOFF
and updating counter module before switching to non-secure mode
and we don't need to.

As the psci_smp_available() helper always returns false if CONFIG_SMP
is disabled, it can't be used safely as an indicator of PSCI usage.
For that reason, we check for the mandatory PSCI operation to be
available.

Please note, an extra check to prevent secure_cntvoff_init() from
being called for secondary CPUs in headsmp-apmu.S is not needed,
as SMP code for APMU based system is not executed if PSCI is in use.

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Julien Grall <julien.grall@arm.com>

---
You can find previous discussions here:
[v1] https://lkml.org/lkml/2019/4/17/810
[v2] https://lkml.org/lkml/2019/5/3/338
[v3] https://lkml.org/lkml/2019/5/10/415
[RFC] https://lkml.org/lkml/2019/5/10/473
[v4] https://lkml.org/lkml/2019/5/14/550

Changes in v2:
- Clarify patch subject/description
- Don't use CONFIG_ARM_PSCI option, check whether the PSCI is available,
by using psci_smp_available()
- Check whether we are running on top of Xen, by using xen_domain()

Changes in v3:
- Don't check for the presence of Xen

Changes in v4:
- Don't use psci_smp_available() helper, check for psci_ops.cpu_on
directly
- Skip updating counter module if PSCI is available

Changes in v5:
- Check for psci_ops.cpu_on if CONFIG_ARM_PSCI_FW is defined
---
arch/arm/mach-shmobile/setup-rcar-gen2.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index eea60b2..0eeca49b 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
+#include <linux/psci.h>
#include <asm/mach/arch.h>
#include <asm/secure_cntvoff.h>
#include "common.h"
@@ -62,6 +63,21 @@ void __init rcar_gen2_timer_init(void)
{
void __iomem *base;
u32 freq;
+ bool need_update = true;
+
+ /*
+ * If PSCI is available then most likely we are running on PSCI-enabled
+ * U-Boot which, we assume, has already taken care of resetting CNTVOFF
+ * and updating counter module before switching to non-secure mode
+ * and we don't need to.
+ */
+#if defined(CONFIG_ARM_PSCI_FW)
+ if (psci_ops.cpu_on)
+ need_update = false;
+#endif
+
+ if (need_update == false)
+ goto skip_update;

secure_cntvoff_init();

@@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void)

iounmap(base);

+skip_update:
of_clk_init(NULL);
timer_probe();
}
--
2.7.4
\
 
 \ /
  Last update: 2019-05-17 11:59    [W:0.074 / U:28.952 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site