lkml.org 
[lkml]   [2019]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] arm64: DTS: allwinner: a64: enable ANX6345 bridge on Teres-I
On Thu, May 16, 2019 at 09:06:41AM -0700, Vasily Khoruzhick wrote:
>
> Driver can talk to the panel over AUX channel only after t1+t3, t1 is
> up to 10ms, t3 is up to 200ms.

This is after power-on. The boot loader needs to deal with this.

> It works with older version of driver
> that keeps panel always on because it takes a while between driver
> probe and pipeline start.

No lid switch, no USB, no WiFi, no MMC. If you disable DCDC1 you'll
run out of wakeup-sources ;-) IOW: I see no practical way any OS
driver can switch this panel voltage off and survive...

> All in all - you don't need panel timings since there's EDID but you
> still need panel delays. Anyway, it's up to you and maintainers.

Let's give it a try.

Torsten

\
 
 \ /
  Last update: 2019-05-16 18:52    [W:0.059 / U:30.848 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site