lkml.org 
[lkml]   [2019]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ACPI/PCI: PM: Add missing wakeup.flags.valid checks
Date
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.

However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.

Add the missing wakeup.flags.valid checks to these functions.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
drivers/acpi/device_pm.c | 4 ++--
drivers/pci/pci-acpi.c | 3 ++-
2 files changed, 4 insertions(+), 3 deletions(-)

Index: linux-pm/drivers/pci/pci-acpi.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-acpi.c
+++ linux-pm/drivers/pci/pci-acpi.c
@@ -666,7 +666,8 @@ static bool acpi_pci_need_resume(struct
if (!adev || !acpi_device_power_manageable(adev))
return false;

- if (device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count)
+ if (adev->wakeup.flags.valid &&
+ device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count)
return true;

if (acpi_target_system_state() == ACPI_STATE_S0)
Index: linux-pm/drivers/acpi/device_pm.c
===================================================================
--- linux-pm.orig/drivers/acpi/device_pm.c
+++ linux-pm/drivers/acpi/device_pm.c
@@ -952,8 +952,8 @@ static bool acpi_dev_needs_resume(struct
u32 sys_target = acpi_target_system_state();
int ret, state;

- if (!pm_runtime_suspended(dev) || !adev ||
- device_may_wakeup(dev) != !!adev->wakeup.prepare_count)
+ if (!pm_runtime_suspended(dev) || !adev || (adev->wakeup.flags.valid &&
+ device_may_wakeup(dev) != !!adev->wakeup.prepare_count))
return true;

if (sys_target == ACPI_STATE_S0)


\
 
 \ /
  Last update: 2019-05-16 12:43    [W:0.022 / U:21.564 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site