[lkml]   [2019]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
On Tue, May 14, 2019 at 10:54:45PM +0200, Jernej Skrabec wrote:
> The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side
> identifies as BCM43430, while the Bluetooth side identifies as BCM43438.
> WiFi is connected to mmc1 and the Bluetooth side is connected to UART1
> in a 4 wire configuration. Same as the WiFi side, due to being the same
> chip and package, DLDO2 provides overall power via VBAT, and DLDO4
> provides I/O power via VDDIO. The RTC clock output provides the LPO low
> power clock at 32.768 kHz.
> This patch enables WiFi and Bluetooth on OrangePi Win boards and adds
> missing LPO clock on the WiFi side. PCM connection also exists for
> Bluetooth audio, but it's not used here.
> Bluetooth UART speed is set to 1.5 MBaud in order to be able transmit
> audio. While module supports even higher speeds, currently sunxi clock
> driver doesn't support higher speed.
> Signed-off-by: Jernej Skrabec <>

Queued for 5.3, thanks


Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2019-05-16 10:53    [W:0.026 / U:27.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site