lkml.org 
[lkml]   [2019]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for vibrator
Date
This patch adds device device tree bindings for the vibrator found on
the LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
This is a resend of the following patch that has missed the last two
merge windows:

https://lore.kernel.org/lkml/20190206013329.18195-4-masneyb@onstation.org/

.../qcom-msm8974-lge-nexus5-hammerhead.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index b3b04736a159..1fd9f429f34a 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>

/ {
model = "LGE MSM 8974 HAMMERHEAD";
@@ -306,6 +307,36 @@
input-enable;
};
};
+
+ vibrator_pin: vibrator {
+ pwm {
+ pins = "gpio27";
+ function = "gp1_clk";
+
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ enable {
+ pins = "gpio60";
+ function = "gpio";
+ };
+ };
+ };
+
+ vibrator@fd8c3450 {
+ compatible = "qcom,msm8974-vibrator";
+ reg = <0xfd8c3450 0x400>;
+
+ vcc-supply = <&pm8941_l19>;
+
+ clocks = <&mmcc CAMSS_GP1_CLK>;
+ clock-names = "pwm";
+
+ enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_pin>;
};

sdhci@f9824900 {
--
2.17.2
\
 
 \ /
  Last update: 2019-05-16 10:51    [W:0.042 / U:39.612 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site