lkml.org 
[lkml]   [2019]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject[PATCH 0/2] Fix LED GPIO trigger behavior
From
*** BLURB HERE ***
Hello there,

I recently tested ledtrig-gpio on an embedded controller and one of the
issues I had involve not requesting the user input pin as GPIO.

In many embedded systems, a pin could be muxed as several functions, and
requesting the pin as GPIO is necessary to let pinmux select the pin as
a GPIO instead of, say an I2C pin. I'd like to learn whether it is appropriate
to assume user of ledtrig-gpio really intends to use GPIOs and not some
weird pins that are used as other functions.

Kun Yi (2):
ledtrig-gpio: Request user input pin as GPIO
ledtrig-gpio: 0 is a valid GPIO number

drivers/leds/trigger/ledtrig-gpio.c | 35 ++++++++++++++++++++---------
1 file changed, 24 insertions(+), 11 deletions(-)

--
2.21.0.1020.gf2820cf01a-goog

\
 
 \ /
  Last update: 2019-05-16 23:44    [W:0.043 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site