lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND V6 2/3] ASoC: fsl_asrc: replace the process_option table with function
Date
When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.

We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_asrc.c | 71 +++++++++++++++++++++++++++++-----------
1 file changed, 51 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index ea035c12a325..a8d6710f2541 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -26,24 +26,6 @@
#define pair_dbg(fmt, ...) \
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)

-/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][12][2] = {
- /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
-};
-
/* Corresponding to process_option */
static int supported_input_rate[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
@@ -79,6 +61,52 @@ static unsigned char output_clk_map_imx53[] = {

static unsigned char *clk_map[2];

+/**
+ * Select the pre-processing and post-processing options
+ * Make sure to exclude following unsupported cases before
+ * calling this function:
+ * 1) inrate > 8.125 * outrate
+ * 2) inrate > 16.125 * outrate
+ *
+ * inrate: input sample rate
+ * outrate: output sample rate
+ * pre_proc: return value for pre-processing option
+ * post_proc: return value for post-processing option
+ */
+static void fsl_asrc_sel_proc(int inrate, int outrate,
+ int *pre_proc, int *post_proc)
+{
+ bool post_proc_cond2;
+ bool post_proc_cond0;
+
+ /* select pre_proc between [0, 2] */
+ if (inrate * 8 > 33 * outrate)
+ *pre_proc = 2;
+ else if (inrate * 8 > 15 * outrate) {
+ if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+ } else if (inrate < 76000)
+ *pre_proc = 0;
+ else if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+
+ /* Condition for selection of post-processing */
+ post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) ||
+ (inrate > 56000 && outrate < 56000);
+ post_proc_cond0 = inrate * 23 < outrate * 8;
+
+ if (post_proc_cond2)
+ *post_proc = 2;
+ else if (post_proc_cond0)
+ *post_proc = 0;
+ else
+ *post_proc = 1;
+}
+
/**
* Request ASRC pair
*
@@ -239,6 +267,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
+ int pre_proc, post_proc;
struct clk *clk;
bool ideal;

@@ -377,11 +406,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
ASRCTR_IDR(index) | ASRCTR_USR(index));

+ fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
+
/* Apply configurations for pre- and post-processing */
regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index),
- ASRCFG_PREMOD(index, process_option[in][out][0]) |
- ASRCFG_POSTMOD(index, process_option[in][out][1]));
+ ASRCFG_PREMOD(index, pre_proc) |
+ ASRCFG_POSTMOD(index, post_proc));

return fsl_asrc_set_ideal_ratio(pair, inrate, outrate);
}
--
2.21.0
\
 
 \ /
  Last update: 2019-05-15 08:42    [W:0.029 / U:3.652 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site