lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.1 46/46] f2fs: Fix use of number of devices
Date
From: Damien Le Moal <damien.lemoal@wdc.com>

commit 0916878da355650d7e77104a7ac0fa1784eca852 upstream.

For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.

However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.

Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.

Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
fs/f2fs/data.c | 17 +++++++++++------
fs/f2fs/f2fs.h | 13 ++++++++++++-
fs/f2fs/file.c | 2 +-
fs/f2fs/gc.c | 2 +-
fs/f2fs/segment.c | 13 +++++++------
5 files changed, 32 insertions(+), 15 deletions(-)

--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -220,12 +220,14 @@ struct block_device *f2fs_target_device(
struct block_device *bdev = sbi->sb->s_bdev;
int i;

- for (i = 0; i < sbi->s_ndevs; i++) {
- if (FDEV(i).start_blk <= blk_addr &&
- FDEV(i).end_blk >= blk_addr) {
- blk_addr -= FDEV(i).start_blk;
- bdev = FDEV(i).bdev;
- break;
+ if (f2fs_is_multi_device(sbi)) {
+ for (i = 0; i < sbi->s_ndevs; i++) {
+ if (FDEV(i).start_blk <= blk_addr &&
+ FDEV(i).end_blk >= blk_addr) {
+ blk_addr -= FDEV(i).start_blk;
+ bdev = FDEV(i).bdev;
+ break;
+ }
}
}
if (bio) {
@@ -239,6 +241,9 @@ int f2fs_target_device_index(struct f2fs
{
int i;

+ if (!f2fs_is_multi_device(sbi))
+ return 0;
+
for (i = 0; i < sbi->s_ndevs; i++)
if (FDEV(i).start_blk <= blkaddr && FDEV(i).end_blk >= blkaddr)
return i;
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1366,6 +1366,17 @@ static inline bool time_to_inject(struct
}
#endif

+/*
+ * Test if the mounted volume is a multi-device volume.
+ * - For a single regular disk volume, sbi->s_ndevs is 0.
+ * - For a single zoned disk volume, sbi->s_ndevs is 1.
+ * - For a multi-device volume, sbi->s_ndevs is always 2 or more.
+ */
+static inline bool f2fs_is_multi_device(struct f2fs_sb_info *sbi)
+{
+ return sbi->s_ndevs > 1;
+}
+
/* For write statistics. Suppose sector size is 512 bytes,
* and the return value is in kbytes. s is of struct f2fs_sb_info.
*/
@@ -3615,7 +3626,7 @@ static inline bool f2fs_force_buffered_i

if (f2fs_post_read_required(inode))
return true;
- if (sbi->s_ndevs)
+ if (f2fs_is_multi_device(sbi))
return true;
/*
* for blkzoned device, fallback direct IO to buffered IO, so
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2573,7 +2573,7 @@ static int f2fs_ioc_flush_device(struct
sizeof(range)))
return -EFAULT;

- if (sbi->s_ndevs <= 1 || sbi->s_ndevs - 1 <= range.dev_num ||
+ if (!f2fs_is_multi_device(sbi) || sbi->s_ndevs - 1 <= range.dev_num ||
__is_large_section(sbi)) {
f2fs_msg(sbi->sb, KERN_WARNING,
"Can't flush %u in %d for segs_per_sec %u != 1\n",
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1346,7 +1346,7 @@ void f2fs_build_gc_manager(struct f2fs_s
sbi->gc_pin_file_threshold = DEF_GC_FAILED_PINNED_FILES;

/* give warm/cold data area from slower device */
- if (sbi->s_ndevs && !__is_large_section(sbi))
+ if (f2fs_is_multi_device(sbi) && !__is_large_section(sbi))
SIT_I(sbi)->last_victim[ALLOC_NEXT] =
GET_SEGNO(sbi, FDEV(0).end_blk) + 1;
}
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -580,7 +580,7 @@ static int submit_flush_wait(struct f2fs
int ret = 0;
int i;

- if (!sbi->s_ndevs)
+ if (!f2fs_is_multi_device(sbi))
return __submit_flush_wait(sbi, sbi->sb->s_bdev);

for (i = 0; i < sbi->s_ndevs; i++) {
@@ -648,7 +648,8 @@ int f2fs_issue_flush(struct f2fs_sb_info
return ret;
}

- if (atomic_inc_return(&fcc->queued_flush) == 1 || sbi->s_ndevs > 1) {
+ if (atomic_inc_return(&fcc->queued_flush) == 1 ||
+ f2fs_is_multi_device(sbi)) {
ret = submit_flush_wait(sbi, ino);
atomic_dec(&fcc->queued_flush);

@@ -754,7 +755,7 @@ int f2fs_flush_device_cache(struct f2fs_
{
int ret = 0, i;

- if (!sbi->s_ndevs)
+ if (!f2fs_is_multi_device(sbi))
return 0;

for (i = 1; i < sbi->s_ndevs; i++) {
@@ -1369,7 +1370,7 @@ static int __queue_discard_cmd(struct f2

trace_f2fs_queue_discard(bdev, blkstart, blklen);

- if (sbi->s_ndevs) {
+ if (f2fs_is_multi_device(sbi)) {
int devi = f2fs_target_device_index(sbi, blkstart);

blkstart -= FDEV(devi).start_blk;
@@ -1732,7 +1733,7 @@ static int __f2fs_issue_discard_zone(str
block_t lblkstart = blkstart;
int devi = 0;

- if (sbi->s_ndevs) {
+ if (f2fs_is_multi_device(sbi)) {
devi = f2fs_target_device_index(sbi, blkstart);
blkstart -= FDEV(devi).start_blk;
}
@@ -3089,7 +3090,7 @@ static void update_device_state(struct f
struct f2fs_sb_info *sbi = fio->sbi;
unsigned int devidx;

- if (!sbi->s_ndevs)
+ if (!f2fs_is_multi_device(sbi))
return;

devidx = f2fs_target_device_index(sbi, fio->new_blkaddr);

\
 
 \ /
  Last update: 2019-05-15 13:35    [W:0.131 / U:5.740 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site