lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] support reserving crashkernel above 4G on arm64 kdump
From
Date
Hi Bhupesh,

On 2019/5/15 13:06, Bhupesh Sharma wrote:
> +Cc kexec-list.
>
> Hi Chen,
>
> I think we are still in the quiet period of the merge cycle, but this is a change which will be useful for systems like HPE Apollo where we are looking at reserving crashkernel across a larger range.
>
> Some comments inline and in respective patch threads..
>
> On 05/07/2019 09:20 AM, Chen Zhou wrote:
>> This patch series enable reserving crashkernel on high memory in arm64.
>
> Please fix the patch subject, it should be v5.
> Also please Cc the kexec-list (kexec@lists.infradead.org) for future versions to allow wider review of the patchset.
>
>> We use crashkernel=X to reserve crashkernel below 4G, which will fail
>> when there is no enough memory. Currently, crashkernel=Y@X can be used
>> to reserve crashkernel above 4G, in this case, if swiotlb or DMA buffers
>> are requierd, capture kernel will boot failure because of no low memory.
>
> ... ^^ required
>
> s/capture kernel will boot failure because of no low memory./capture kernel boot will fail because there is no low memory available for allocation.
>
>> When crashkernel is reserved above 4G in memory, kernel should reserve
>> some amount of low memory for swiotlb and some DMA buffers. So there may
>> be two crash kernel regions, one is below 4G, the other is above 4G. Then
>> Crash dump kernel reads more than one crash kernel regions via a dtb
>> property under node /chosen,
>> linux,usable-memory-range = <BASE1 SIZE1 [BASE2 SIZE2]>.
>
> Please use consistent naming for the second kernel, better to use crash dump kernel.
>
> I have tested this on my HPE Apollo machine and with crashkernel=886M,high syntax, I can get the board to reserve a larger memory range for the crashkernel (i.e. 886M):
>
> # dmesg | grep -i crash
> [ 0.000000] kexec_core: Reserving 256MB of low memory at 3560MB for crashkernel (System low RAM: 2029MB)
> [ 0.000000] crashkernel reserved: 0x0000000bc5a00000 - 0x0000000bfd000000 (886 MB)
>
> kexec/kdump can also work also work fine on the board.
>
> So, with the changes suggested in this cover letter and individual patches, please feel free to add:
>
> Reviewed-and-Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
>
> Thanks,
> Bhupesh
>

Thanks for you review and test. I will fix these later.

Thanks,
Chen Zhou

>> Besides, we need to modify kexec-tools:
>> arm64: support more than one crash kernel regions(see [1])
>>
>> I post this patch series about one month ago. The previous changes and
>> discussions can be retrived from:
>>
>> Changes since [v4]
>> - reimplement memblock_cap_memory_ranges for multiple ranges by Mike.
>>
>> Changes since [v3]
>> - Add memblock_cap_memory_ranges back for multiple ranges.
>> - Fix some compiling warnings.
>>
>> Changes since [v2]
>> - Split patch "arm64: kdump: support reserving crashkernel above 4G" as
>> two. Put "move reserve_crashkernel_low() into kexec_core.c" in a separate
>> patch.
>>
>> Changes since [v1]:
>> - Move common reserve_crashkernel_low() code into kernel/kexec_core.c.
>> - Remove memblock_cap_memory_ranges() i added in v1 and implement that
>> in fdt_enforce_memory_region().
>> There are at most two crash kernel regions, for two crash kernel regions
>> case, we cap the memory range [min(regs[*].start), max(regs[*].end)]
>> and then remove the memory range in the middle.
>>
>> [1]: http://lists.infradead.org/pipermail/kexec/2019-April/022792.html
>> [v1]: https://lkml.org/lkml/2019/4/2/1174
>> [v2]: https://lkml.org/lkml/2019/4/9/86
>> [v3]: https://lkml.org/lkml/2019/4/9/306
>> [v4]: https://lkml.org/lkml/2019/4/15/273
>>
>> Chen Zhou (3):
>> x86: kdump: move reserve_crashkernel_low() into kexec_core.c
>> arm64: kdump: support reserving crashkernel above 4G
>> kdump: update Documentation about crashkernel on arm64
>>
>> Mike Rapoport (1):
>> memblock: extend memblock_cap_memory_range to multiple ranges
>>
>> Documentation/admin-guide/kernel-parameters.txt | 6 +--
>> arch/arm64/include/asm/kexec.h | 3 ++
>> arch/arm64/kernel/setup.c | 3 ++
>> arch/arm64/mm/init.c | 72 +++++++++++++++++++------
>> arch/x86/include/asm/kexec.h | 3 ++
>> arch/x86/kernel/setup.c | 66 +++--------------------
>> include/linux/kexec.h | 5 ++
>> include/linux/memblock.h | 2 +-
>> kernel/kexec_core.c | 56 +++++++++++++++++++
>> mm/memblock.c | 44 +++++++--------
>> 10 files changed, 157 insertions(+), 103 deletions(-)
>>
>
>
> .
>

\
 
 \ /
  Last update: 2019-05-16 05:20    [W:0.105 / U:9.348 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site