lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] memory: move jedec_ddr_data.c from lib/ to drivers/memory/
Date
jedec_ddr_data.c exports the lpddr2_jedec_* symbols, and all of them
are only referenced from drivers/memory/{emif.c,of_memory.c}

drivers/memory/ is a better location than lib/.

I removed the Kconfig prompt "JEDEC DDR data" because it is only
select'ed by TI_EMIF, and there is no other user. There is no good
reason in making it a user-configurable CONFIG option.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

drivers/memory/Kconfig | 8 ++++++++
drivers/memory/Makefile | 1 +
{lib => drivers/memory}/jedec_ddr_data.c | 0
lib/Kconfig | 8 --------
lib/Makefile | 2 --
5 files changed, 9 insertions(+), 10 deletions(-)
rename {lib => drivers/memory}/jedec_ddr_data.c (100%)

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 2d91b00..fa17b3e 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -7,6 +7,14 @@ menuconfig MEMORY

if MEMORY

+config DDR
+ bool
+ help
+ Data from JEDEC specs for DDR SDRAM memories,
+ particularly the AC timing parameters and addressing
+ information. This data is useful for drivers handling
+ DDR SDRAM controllers.
+
config ARM_PL172_MPMC
tristate "ARM PL172 MPMC driver"
depends on ARM_AMBA && OF
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 91ae4eb..9d5c409 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -3,6 +3,7 @@
# Makefile for memory devices
#

+obj-$(CONFIG_DDR) += jedec_ddr_data.o
ifeq ($(CONFIG_DDR),y)
obj-$(CONFIG_OF) += of_memory.o
endif
diff --git a/lib/jedec_ddr_data.c b/drivers/memory/jedec_ddr_data.c
similarity index 100%
rename from lib/jedec_ddr_data.c
rename to drivers/memory/jedec_ddr_data.c
diff --git a/lib/Kconfig b/lib/Kconfig
index 3577609..473f937 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -530,14 +530,6 @@ config LRU_CACHE
config CLZ_TAB
bool

-config DDR
- bool "JEDEC DDR data"
- help
- Data from JEDEC specs for DDR SDRAM memories,
- particularly the AC timing parameters and addressing
- information. This data is useful for drivers handling
- DDR SDRAM controllers.
-
config IRQ_POLL
bool "IRQ polling library"
help
diff --git a/lib/Makefile b/lib/Makefile
index fb76970..cb66bc9 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -206,8 +206,6 @@ obj-$(CONFIG_SIGNATURE) += digsig.o

lib-$(CONFIG_CLZ_TAB) += clz_tab.o

-obj-$(CONFIG_DDR) += jedec_ddr_data.o
-
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o

--
2.7.4
\
 
 \ /
  Last update: 2019-05-15 17:05    [W:0.046 / U:7.924 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site